I have a 02 Trailblazer LT and I would like a low slamming box for my 18" BTL N2 Fully Loaded running off 2000w.
I'm currently running a 30hz @ 7ft^3 box but the port area seems small its like 11inches per ft^3. I used to run a 6.5^ft3 @ 30hz box with 15inches of port per ft^3 and it slapped lows I want similiar with a KERFED port.
NOW THIS IS WHAT I WANT!
I wanted a KERFED design for a low slamming box max dimensions are: 43w x 18h x 30d
Needs to be 28-30hz @ 7ft^3 and I want around 14-15 inches of port per ft^3 I need a picture/cut sheet and information on the kerf cuts. Anyone who does this I can pay 5-10$ USD but it MUST be a good box builder such as Rabbit etc.
LMK PEOPLE WANNA SLAP LOWS.