Didn't get much help at CACO, so I'll try here. Looking for suggestions on this design for two SA-8's. Goal is a loud daily system. Will have approximately 1000W given to the pair. Looking for near flat response from 25-60hz. Would love to be near the 140dB level, but I know that's shooting high for two 8's.
Rear Chamber: 1.5cf @ 35hz with 15 in^2 port area
Front Chamber: 1.5cf @55hz with 30 in^2 port area
Just looking for general tips. Maybe a better layout can be had with my dimensions. Or different volume chambers would work better, maybe different tunings. Want to make sure it's not going to be too heavy on the upper frequencies. Really want it to pound in the 30-50hz range.
Thanks for the help gents!