100" wide
500" tall
200" deep
100" wide
500" tall
200" deep
If you have time to get to it, I'd like to see what can you come up with for 20x38.5x27.5, Single ZCON 18, Tuned to 30-32.
97 4runner, 3RZ, 5 Speed
Headunit: Pioneer DEH-P9800BT
Mids: Pioneer ????
Tweets: CDT DRT-25
Fronts Amp: Memphis M-Class 4x50
Sub Amp: Crescendo 2K
Substage: 2x 12" XFL's or 18" SSA ZCON
Electrical: 160 Amp Alt, Duralast Gold, Interstate DCM0100, 2/0 Throughout
13"h x 37"w x 26"d.....two havoc 12s and a DC 5k.......forward facing in BMW....tired of this 148.8......LMAO
97 4runner, 3RZ, 5 Speed
Headunit: Pioneer DEH-P9800BT
Mids: Pioneer ????
Tweets: CDT DRT-25
Fronts Amp: Memphis M-Class 4x50
Sub Amp: Crescendo 2K
Substage: 2x 12" XFL's or 18" SSA ZCON
Electrical: 160 Amp Alt, Duralast Gold, Interstate DCM0100, 2/0 Throughout
maybe you could build all of them for free eh?
---------- Post added at 11:39 PM ---------- Previous post was at 11:38 PM ----------
not much experience with ssa.. im more of a sundown man myself. but ill see what I can come up with lol how about a tapped horn lmao
97 4runner, 3RZ, 5 Speed
Headunit: Pioneer DEH-P9800BT
Mids: Pioneer ????
Tweets: CDT DRT-25
Fronts Amp: Memphis M-Class 4x50
Sub Amp: Crescendo 2K
Substage: 2x 12" XFL's or 18" SSA ZCON
Electrical: 160 Amp Alt, Duralast Gold, Interstate DCM0100, 2/0 Throughout
I got a tad above 6 cu ft, tuned to 32, with 102sq inches of port which gives you about 17 sq inches per cu ft... that may be a little too much port though... idk if the dims you gave me include your port clearance but you could tune higher and move the port closer to a wall so it loads off of it and lowers the tuning...
97 4runner, 3RZ, 5 Speed
Headunit: Pioneer DEH-P9800BT
Mids: Pioneer ????
Tweets: CDT DRT-25
Fronts Amp: Memphis M-Class 4x50
Sub Amp: Crescendo 2K
Substage: 2x 12" XFL's or 18" SSA ZCON
Electrical: 160 Amp Alt, Duralast Gold, Interstate DCM0100, 2/0 Throughout
choke down the volume to about 6.. try that with like 100 sq inches of port. ive had a few 18s and they all seemed to do well in that sort of generic setup.. but build it and see, learn what you need to do then go from there. if you still want I can come up with a rendering but im a little backed up right now lol so it may take a while
Bookmarks