1. ## Quick porting question

Ok so basically here is the question.

4 cubes ported at 38HZ

One 4" port wants to come out at 2.94" for 38HZ

Two 4" ports for 38HZ comes out at 8.8"

Does that mean I make both ports 8.8" or do I make two at 4.4"?

Using this site.. Port Length Calculator

Thanks!

2. ## Re: Quick porting question

Hold on, something isnt adding up right... 4 cubes and the port only 4" long. I wouldn't use that site, use WinISD so that you can actually see your air velocity and prevent port noise...

Check out my video tutorial here:

3. ## Re: Quick porting question

Originally Posted by PapaGeno21
Ok so basically here is the question.

4 cubes ported at 38HZ

One 4" port wants to come out at 2.94" for 38HZ

Two 4" ports for 38HZ comes out at 8.8"

Does that mean I make both ports 8.8" or do I make two at 4.4"?

Using this site.. Port Length Calculator

Thanks!
IF those calculations are correct(use his video), you would not split the length between the 2... If its day 3" with 1, it's not gonna be 4" each for 2.. They're approx twice as long when you double the aeros.

4. ## Re: Quick porting question

Originally Posted by ssteele18
IF those calculations are correct(use his video), you would not split the length between the 2... If its day 3" with 1, it's not gonna be 4" each for 2.. They're approx twice as long when you double the aeros.
Thats the rule of thumb I was thinking in my head, I would not trust that calculator.

5. ## Re: Quick porting question

Yeah I will be doing 2 ports at 9" long each. 4" diameter. Approx 37 HZ in a 4 cubed box.

## User Tag List

#### Posting Permissions

• You may not post new threads
• You may post replies
• You may post attachments
• You may edit your posts