how do you do the raised logos on boxes?
just cut um out with a jigsaw sand um and glue um down or what?
thx.
Printable View
how do you do the raised logos on boxes?
just cut um out with a jigsaw sand um and glue um down or what?
thx.
Ancient chinese secret!!!!....lol........i use 1/4 mdf and a scroll saw on most of them....i then glue and staple them to enclosure....i think some guys use the high density foam as well......
ok thanks tried to search this but my phone is being wierd. what is a scroll saw?Quote:
Originally Posted by double 07
sorry i probably sound like a retaard.
It's a saw that sits on a stand or table top....its kinda like a jigsaw thats stationary but it has a tiny blade so it makes really tight turns and cuts......i have a porter cable one and LOVE it....one of my favorite tools
o yeah i know what your talking about i have one of those!!!!!! haha sorry i was confused.Quote:
Originally Posted by double 07
---------- Post added at 07:31 AM ---------- Previous post was at 07:30 AM ----------
well i have a bandsaw. same thing?
would it do it as good? i used it for trim on a deck i built....
Yeah you could probably pull it off with a bandsaw....definitely easier than using a JIGSAW.....lol
ok haha well i had never thought about using that...... thanks broski.Quote:
Originally Posted by double 07
Only problem is, if you're doing closed letters, i.e. O or R or P, you would have to cut through it to the inner circle with the band saw, whereas the scroll saw detaches to go inside the circle to cut it out.
how are you covering the box? if in vinyl, you can use some left over dampener(IE dynamat) and a razor
Yep, there are several ways to go with doing logos. Foam, wood, or anything that will raise up the surface will work.
There are differences in each way and each poses it's own pros and cons.
Never thought of that! Just gunna do the ascendant audio logo so Idk if it'll be a prob or not?Quote:
Originally Posted by ssteele18
---------- Post added at 02:08 PM ---------- Previous post was at 02:07 PM ----------
Just some black carpet.Quote:
Originally Posted by dreid
I'd go foam. Easy to work with, and IMO the soft edges look better for stuff like this.
Just be cool with the band saw....real tight turns can break the bladeQuote:
Originally Posted by garretttt4
But I guess the AA logo doesn't have any turn lol
release cuts make using a band saw much much easier if you have to.Quote:
Originally Posted by bhsdriller
true...I just remember in high school wood shop the idiots in there would break blades left and right. We had a huge industrial sized one from like WW2 or something like that and it sounded like a gun shot when the blade wentQuote:
Originally Posted by pro-rabbit