Closed Thread
Results 1 to 8 of 8

Reload Thread: Assembling/diassembling aeroports with flares question

  1. #1
    95Prober's Avatar
    95Prober is offline CarAudio.com Elite



    Join Date
    Nov 2004
    Location
    Canada
    Posts
    1,180
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Assembling/diassembling aeroports with flares question

    Hey guys
    I installed a couple of 6" aeroports with flares on both ends. I may be building another and want to reuse them down the road I used the PVC cement/epoxy and Im sure it would be impossible to remove the flares from the actual tubing. So I assume Ill have to cut the center tube in half. Must I make the cut closest to one of the flared ends? If so, what should I use to reattach everything assuming the flares cant be taken apart?

    Thanks



    MY SET-UP :
    Head Unit :Pioneer Premier P660 w/ card remote
    Subwoofers :4-12" Pioneer Premier TSW-1241 (Dual-Voice Coils)
    Sub Amps :2 Zenon ASB-2200.1
    Speaker Amp:Soundstream Rubicon 604 (4Ch.)
    Rear Speak Fill:6x9 Infinity's
    Front Speak:CDT (CL-641 3-Way Comps in custom kickpods)
    Wires/Cables/Installation :2 runs of 0/1 guage, Knukonceptz RCA's, battery terminals, fuseholders, and 12,14 guage speaker wire and.. The Big 3
    Sound deadening : 30sq.ft of Secondskin & 150 B-Quiet Extreme for doors etc., 200 sq.ft of Edead v.2 for floors and trunk
    Box:6 Cu.Ft @32Hz
    Refs:scottyk,Fuknmovin,Bavarian3,Blados,Blazrgreg, juckstapose,
    acousticguitar,IonSQL,SQBubble,dragnix,02parkave,
    DUMPED




  2. #2
    95Prober's Avatar
    95Prober is offline CarAudio.com Elite

    Threadstarter


    Join Date
    Nov 2004
    Location
    Canada
    Posts
    1,180
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Assembling/diassembling aeroports with flares question

    Would attaching 6" aeroport pieces together with duct tape or something else be an option?



    MY SET-UP :
    Head Unit :Pioneer Premier P660 w/ card remote
    Subwoofers :4-12" Pioneer Premier TSW-1241 (Dual-Voice Coils)
    Sub Amps :2 Zenon ASB-2200.1
    Speaker Amp:Soundstream Rubicon 604 (4Ch.)
    Rear Speak Fill:6x9 Infinity's
    Front Speak:CDT (CL-641 3-Way Comps in custom kickpods)
    Wires/Cables/Installation :2 runs of 0/1 guage, Knukonceptz RCA's, battery terminals, fuseholders, and 12,14 guage speaker wire and.. The Big 3
    Sound deadening : 30sq.ft of Secondskin & 150 B-Quiet Extreme for doors etc., 200 sq.ft of Edead v.2 for floors and trunk
    Box:6 Cu.Ft @32Hz
    Refs:scottyk,Fuknmovin,Bavarian3,Blados,Blazrgreg, juckstapose,
    acousticguitar,IonSQL,SQBubble,dragnix,02parkave,
    DUMPED

  3. #3
    mazdakid's Avatar
    mazdakid is offline CarAudio.com Veteran



    Join Date
    Oct 2004
    Location
    illnoise
    Age
    30
    Posts
    10,386
    Post Thanks / Like
    Mentioned
    42 Post(s)

    Re: Assembling/diassembling aeroports with flares question

    Packing tape or duct tape works for me. I also trimmed the one side on mine so i could slide it through the hole with it assembled.



    traded-pickup1, power-fanatic07, fbi90909
    sold to-superspank, dumple, JoeRa22, sub-FATHER, TrlcKed_OuT, rosrock, dcole18, RaiN, BassAddictJ, tommyk90, MANTI5, Micah_Jones, mrflamboynt, g6ryder, rebelfromva, n8skow

  4. #4
    mylows10's Avatar
    mylows10 is online now Dc,tantric,singer,phd rep mylows10 is a Supporting Member of the forum!

    mylows10 is a Supporting Vendor of the forum!

    Join Date
    Sep 2009
    Location
    monterey , ca
    Age
    51
    Posts
    18,990
    Post Thanks / Like
    Images
    9
    Mentioned
    490 Post(s)

    Re: Assembling/diassembling aeroports with flares question

    never glue them use tape or screws to hold them together




    pioneer avhx 5500 dvd, gzpa 1.4000 x 2
    ab vfl 350.4 ,7 pc 2150 and a 150 ah power ware agm ,275 amp singer alt , 2nd one coming soon
    cdt 6.5 es 6 im mids,cdt es 010 tweets,es 02 mids ,mx1000 3 way x overs , sky high and stinger hpm o gauge wires ,also 2 tantric hdd 15's in a 9.5. ^3 ported no wall box 11.5 octo port.
    NOR CAL DB DRAG JUDGE
    http://www.dcsoundlab.com

  5. #5
    95Prober's Avatar
    95Prober is offline CarAudio.com Elite

    Threadstarter


    Join Date
    Nov 2004
    Location
    Canada
    Posts
    1,180
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Assembling/diassembling aeroports with flares question

    Yeah I know. I glued my flares on the ports per the instructions, but not I think I shouldnt have. I cant take them apart I believe now, correct?



    MY SET-UP :
    Head Unit :Pioneer Premier P660 w/ card remote
    Subwoofers :4-12" Pioneer Premier TSW-1241 (Dual-Voice Coils)
    Sub Amps :2 Zenon ASB-2200.1
    Speaker Amp:Soundstream Rubicon 604 (4Ch.)
    Rear Speak Fill:6x9 Infinity's
    Front Speak:CDT (CL-641 3-Way Comps in custom kickpods)
    Wires/Cables/Installation :2 runs of 0/1 guage, Knukonceptz RCA's, battery terminals, fuseholders, and 12,14 guage speaker wire and.. The Big 3
    Sound deadening : 30sq.ft of Secondskin & 150 B-Quiet Extreme for doors etc., 200 sq.ft of Edead v.2 for floors and trunk
    Box:6 Cu.Ft @32Hz
    Refs:scottyk,Fuknmovin,Bavarian3,Blados,Blazrgreg, juckstapose,
    acousticguitar,IonSQL,SQBubble,dragnix,02parkave,
    DUMPED

  6. #6
    kushy_dreams's Avatar
    kushy_dreams is offline The resident hippie



    Join Date
    Sep 2009
    Location
    twenty past four
    Posts
    4,091
    Post Thanks / Like
    Mentioned
    25 Post(s)

    Re: Assembling/diassembling aeroports with flares question

    I like to use electrical tape to hold mine together



    13 Dodge Dart Rallye 1.4T


    http://mobileaudioforum.com/forum/forum.php<

    BOYCOTT SKAR AUDIO! SHADY BUSINESS PRACTICES SHOULD NEVER BE ENCOURAGED!

  7. #7
    95Prober's Avatar
    95Prober is offline CarAudio.com Elite

    Threadstarter


    Join Date
    Nov 2004
    Location
    Canada
    Posts
    1,180
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Assembling/diassembling aeroports with flares question

    I think duct tape would stick much better wouldnt it?



    MY SET-UP :
    Head Unit :Pioneer Premier P660 w/ card remote
    Subwoofers :4-12" Pioneer Premier TSW-1241 (Dual-Voice Coils)
    Sub Amps :2 Zenon ASB-2200.1
    Speaker Amp:Soundstream Rubicon 604 (4Ch.)
    Rear Speak Fill:6x9 Infinity's
    Front Speak:CDT (CL-641 3-Way Comps in custom kickpods)
    Wires/Cables/Installation :2 runs of 0/1 guage, Knukonceptz RCA's, battery terminals, fuseholders, and 12,14 guage speaker wire and.. The Big 3
    Sound deadening : 30sq.ft of Secondskin & 150 B-Quiet Extreme for doors etc., 200 sq.ft of Edead v.2 for floors and trunk
    Box:6 Cu.Ft @32Hz
    Refs:scottyk,Fuknmovin,Bavarian3,Blados,Blazrgreg, juckstapose,
    acousticguitar,IonSQL,SQBubble,dragnix,02parkave,
    DUMPED

  8. #8
    goingdef's Avatar
    goingdef is offline CarAudio.com Veteran



    Join Date
    Jan 2008
    Location
    Norfolk VA
    Age
    34
    Posts
    2,833
    Post Thanks / Like
    Mentioned
    11 Post(s)

    Re: Assembling/diassembling aeroports with flares question

    Quote Originally Posted by 95Prober View Post
    I think duct tape would stick much better wouldnt it?
    well if there pvc ports then that bond is solid and there is nowhere to take it apart at seeing as pvc cement turns the plastic to liquid form and allows the two pieces to bond, good news is if you cut it apart and put a couple reference marks to line the pieces back up the same glue that screwed you can save you use the pvc primer and a small amount of glue line up the marks then pull tape over the top and along the length of it to secure it while the cement sets up.



    electrical: Optima yellow top X 2 big 3 in monster OFC 1/0g high output alt by maniac electrics
    HU: JVC AVX-77 touch screen
    Front stage: RE XXX 6.5" comps
    front stage amp: Rockford T600.2
    subs: 1 Sundown ZV4 12"
    sub amp: Rockford T2500.1BDCP
    Enclosure: ported (by JayDubb757 )

Closed Thread

Similar Threads

  1. Replies: 17
    Last Post: 09-16-2011, 12:36 PM
  2. Newbie here with a question
    By Dee in forum General Discussion
    Replies: 1
    Last Post: 03-09-2004, 12:01 PM
  3. help me out real quck with amp question?
    By MakaveliThaDon in forum Amplifiers
    Replies: 11
    Last Post: 08-04-2003, 11:01 AM
  4. Newbie with newbie questions... long though...
    By Got Chow in forum General Discussion
    Replies: 20
    Last Post: 02-28-2003, 09:43 PM
  5. noob, with a question
    By inferno272 in forum Subwoofers
    Replies: 0
    Last Post: 04-25-2002, 04:46 PM

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts
1e2 Forum