If this don't work I give up

[DDtC]

If you want that, then a simple "quick" enclosure won't cut it. You need buy 10-15 sheets of wood and get building/testing/rebuilding/testing and keep repeating and make sure to take very clear notes. Personally, I write on each enclosure I test with in a single car so I can know exactly what everything did.

My notes normally contain...

Year/Make/Model
What sub
How much power(actual clamp)
SPL
How it sounded
Any notes I felt needed to be wrote for a later date..like box position or loading issues...or what ever.

I get it but it's not simple or quick. You know how many boxes ive been through. I found out a few things along the way. Peak is always in the mid high 40s no matter where I tune after the deadener. Subs like to be up and toward the rear, port likes to be center. That's all I got right now

---------- Post added at 10:41 PM ---------- Previous post was at 10:41 PM ----------

coming to collinsville?

No.

[Villeza1]

I get it but it's not simple or quick. You know how many boxes ive been through. I found out a few things along the way. Peak is always in the mid high 40s no matter where I tune after the deadener. Subs like to be up and toward the rear, port likes to be center. That's all I got right now

Have you tested with different sized enclosures? Smaller, larger?

[DDtC]

Have you tested with different sized enclosures? Smaller, larger?

Within reason. Yes. Anything much bigger then 3 cubes bottoms out. Anything much less don't reach xmax

[pro-rabbit]

Have you tested with different sized enclosures? Smaller, larger?

port area alterations... internal or external ports..

subs/port up with it sealed off around the box(basic beauty panel just more rigid)....

Some times the stupidest things make the biggest differences.

---------- Post added at 09:47 PM ---------- Previous post was at 09:46 PM ----------

Within reason. Yes. Anything much bigger then 3 cubes bottoms out.

At what frequency is it bottoming out? Odds are that is user error.

[DDtC]

port area alterations... internal or external ports..

subs/port up with it sealed off around the box(basic beauty panel just more rigid)....

Some times the stupidest things make the biggest differences.

---------- Post added at 09:47 PM ---------- Previous post was at 09:46 PM ----------



At what frequency is it bottoming out? Odds are that is user error.

It was in the high 30hz range. Nothing low

[CAT MAN]

It was in the high 30hz range. Nothing low

shrink it to 2.4 for each same tuning and everything. watch your score.

[Villeza1]

port area alterations... internal or external ports..

subs/port up with it sealed off around the box(basic beauty panel just more rigid)....

Some times the stupidest things make the biggest differences.

Exactly, I was getting to that point but very slowly Lol.

[DDtC]

I know what everybody is saying. Thats why I decided to copy a proven design. I had to go a bit wider to give the motors clearance but the specs are almost identical. We also are doing it flush mount

Attachment 26535767

[CAT MAN]

those are my subs lol

[DDtC]

those are my subs lol

Those are level 3s

[myjaja]

@myjaja ;

You rang my lord?

[DbDesigns]

You rang my lord?

iirc you had 2 12s and a 10 inch aero that was loud... help op out dawg.

[myjaja]

iirc you had 2 12s and a 10 inch aero that was loud... help op out dawg.

I wouldnt mind helping but I doubt I can be much help. Ive only built two enclosures my whole life, and that was the second one I built. Im a complete novice when it comes to box building. lol

[DbDesigns]

I wouldnt mind helping but I doubt I can be much help. Ive only built two enclosures my whole life, and that was the second one I built. Im a complete novice when it comes to box building. lol

well you were doing 50s so you must know something lol

[myjaja]

well you were doing 50s so you must know something lol

Well, if I remember correctly, my enclosure was 36.5 x 17.5 x 22 and around 5.8-5.9 cu ft net and tuned to around 32-33 hz. Had a 10" diameter port that was 26.5 inches long. Almost the whole back end of my trunk was foamed up. lol

But that worked well for my subs, cant say the same for dc lvl 3's.