Closed Thread
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 20

Reload Thread: Want to buy design and cut sheets.

  1. #1
    justice66's Avatar
    justice66 is offline Member



    Join Date
    Jul 2011
    Location
    Norfolk, VA
    Posts
    122
    Post Thanks / Like
    Mentioned
    5 Post(s)

    Want to buy design and cut sheets.

    I would like to buy a box design for 2 SA-12s that will be on 2200 Watts. The max available space is 42w x 22h x 16d i would like to do subs up port back . the give dimension would be a wall which is not what i want to do right now so the height would need to be lower so the subs are not up against the roof. if there is anything else i need to add let me know. also i would like a fairly simple design as I'm new to box building. thank you for your time
    Last edited by justice66; 08-23-2012 at 01:23 PM. Reason: no proof reading







  2. #2
    mylows10's Avatar
    mylows10 is online now Dc,tantric,singer,phd rep mylows10 is a Supporting Member of the forum!

    mylows10 is a Supporting Vendor of the forum!

    Join Date
    Sep 2009
    Location
    monterey , ca
    Age
    51
    Posts
    18,866
    Post Thanks / Like
    Images
    9
    Mentioned
    486 Post(s)

    Re: Want to buy design and cut sheets.

    what kind of car / truck and do you want a center port or off to one side




    pioneer avhx 5500 dvd, gzpa 1.4000 x 2
    ab vfl 350.4 ,7 pc 2150 and a 150 ah power ware agm ,275 amp singer alt , 2nd one coming soon
    cdt 6.5 es 6 im mids,cdt es 010 tweets,es 02 mids ,mx1000 3 way x overs , sky high and stinger hpm o gauge wires ,also 2 tantric hdd 15's in a 9.5. ^3 ported no wall box 11.5 octo port.
    NOR CAL DB DRAG JUDGE
    http://www.dcsoundlab.com

  3. #3
    justice66's Avatar
    justice66 is offline Member

    Threadstarter


    Join Date
    Jul 2011
    Location
    Norfolk, VA
    Posts
    122
    Post Thanks / Like
    Mentioned
    5 Post(s)

    Re: Want to buy design and cut sheets.

    92 camaro and i would like to have the port in the middle, but if it would sound better or get louder offset that will work too.




  4. #4
    mylows10's Avatar
    mylows10 is online now Dc,tantric,singer,phd rep mylows10 is a Supporting Member of the forum!

    mylows10 is a Supporting Vendor of the forum!

    Join Date
    Sep 2009
    Location
    monterey , ca
    Age
    51
    Posts
    18,866
    Post Thanks / Like
    Images
    9
    Mentioned
    486 Post(s)

    Re: Want to buy design and cut sheets.

    thats a hatch back




    pioneer avhx 5500 dvd, gzpa 1.4000 x 2
    ab vfl 350.4 ,7 pc 2150 and a 150 ah power ware agm ,275 amp singer alt , 2nd one coming soon
    cdt 6.5 es 6 im mids,cdt es 010 tweets,es 02 mids ,mx1000 3 way x overs , sky high and stinger hpm o gauge wires ,also 2 tantric hdd 15's in a 9.5. ^3 ported no wall box 11.5 octo port.
    NOR CAL DB DRAG JUDGE
    http://www.dcsoundlab.com

  5. #5
    justice66's Avatar
    justice66 is offline Member

    Threadstarter


    Join Date
    Jul 2011
    Location
    Norfolk, VA
    Posts
    122
    Post Thanks / Like
    Mentioned
    5 Post(s)

    Re: Want to buy design and cut sheets.

    yes it a hatch




  6. #6
    mylows10's Avatar
    mylows10 is online now Dc,tantric,singer,phd rep mylows10 is a Supporting Member of the forum!

    mylows10 is a Supporting Vendor of the forum!

    Join Date
    Sep 2009
    Location
    monterey , ca
    Age
    51
    Posts
    18,866
    Post Thanks / Like
    Images
    9
    Mentioned
    486 Post(s)

    Re: Want to buy design and cut sheets.

    there is a guy on here with the same car,l believe his name is nutxo




    pioneer avhx 5500 dvd, gzpa 1.4000 x 2
    ab vfl 350.4 ,7 pc 2150 and a 150 ah power ware agm ,275 amp singer alt , 2nd one coming soon
    cdt 6.5 es 6 im mids,cdt es 010 tweets,es 02 mids ,mx1000 3 way x overs , sky high and stinger hpm o gauge wires ,also 2 tantric hdd 15's in a 9.5. ^3 ported no wall box 11.5 octo port.
    NOR CAL DB DRAG JUDGE
    http://www.dcsoundlab.com

  7. #7
    mylows10's Avatar
    mylows10 is online now Dc,tantric,singer,phd rep mylows10 is a Supporting Member of the forum!

    mylows10 is a Supporting Vendor of the forum!

    Join Date
    Sep 2009
    Location
    monterey , ca
    Age
    51
    Posts
    18,866
    Post Thanks / Like
    Images
    9
    Mentioned
    486 Post(s)

    Re: Want to buy design and cut sheets.

    42w x 13 h x 16 d =3.908 before displacement ,port 18.5 " long by 11.5 tall x 3" wide tuning should be at 32 ,port along the drivers side facing back ,subs up ,middle of the box




    pioneer avhx 5500 dvd, gzpa 1.4000 x 2
    ab vfl 350.4 ,7 pc 2150 and a 150 ah power ware agm ,275 amp singer alt , 2nd one coming soon
    cdt 6.5 es 6 im mids,cdt es 010 tweets,es 02 mids ,mx1000 3 way x overs , sky high and stinger hpm o gauge wires ,also 2 tantric hdd 15's in a 9.5. ^3 ported no wall box 11.5 octo port.
    NOR CAL DB DRAG JUDGE
    http://www.dcsoundlab.com

  8. #8
    justice66's Avatar
    justice66 is offline Member

    Threadstarter


    Join Date
    Jul 2011
    Location
    Norfolk, VA
    Posts
    122
    Post Thanks / Like
    Mentioned
    5 Post(s)

    Re: Want to buy design and cut sheets.

    Quote Originally Posted by mylows10 View Post
    42w x 13 h x 16 d =3.908 before displacement ,port 18.5 " long by 11.5 tall x 3" wide tuning should be at 32 ,port along the drivers side facing back ,subs up ,middle of the box
    I'm trying to picture this im my head. so the port goes top to bottom, 3" wide and goes in the box about 15.5" and then turns in for another 3" to get the 18.5" i hope that sounds right that is how i picture it in my head.




  9. #9
    mylows10's Avatar
    mylows10 is online now Dc,tantric,singer,phd rep mylows10 is a Supporting Member of the forum!

    mylows10 is a Supporting Vendor of the forum!

    Join Date
    Sep 2009
    Location
    monterey , ca
    Age
    51
    Posts
    18,866
    Post Thanks / Like
    Images
    9
    Mentioned
    486 Post(s)

    Re: Want to buy design and cut sheets.

    Quote Originally Posted by justice66 View Post
    I'm trying to picture this im my head. so the port goes top to bottom, 3" wide and goes in the box about 15.5" and then turns in for another 3" to get the 18.5" i hope that sounds right that is how i picture it in my head.
    yes and some small 45's in the back corners




    pioneer avhx 5500 dvd, gzpa 1.4000 x 2
    ab vfl 350.4 ,7 pc 2150 and a 150 ah power ware agm ,275 amp singer alt , 2nd one coming soon
    cdt 6.5 es 6 im mids,cdt es 010 tweets,es 02 mids ,mx1000 3 way x overs , sky high and stinger hpm o gauge wires ,also 2 tantric hdd 15's in a 9.5. ^3 ported no wall box 11.5 octo port.
    NOR CAL DB DRAG JUDGE
    http://www.dcsoundlab.com

  10. #10
    justice66's Avatar
    justice66 is offline Member

    Threadstarter


    Join Date
    Jul 2011
    Location
    Norfolk, VA
    Posts
    122
    Post Thanks / Like
    Mentioned
    5 Post(s)

    Re: Want to buy design and cut sheets.

    Alright I'm going to start building the box in a little bit. i added an extra inch to the height which bump it to 4.25 before displacement. im leaving everything else the same. does anybody else have any input?




  11. #11
    DonH's Avatar
    DonH is offline .....



    Join Date
    Jun 2008
    Location
    So Cal
    Posts
    5,945
    Post Thanks / Like
    Mentioned
    36 Post(s)

    Re: Want to buy design and cut sheets.

    Quote Originally Posted by justice66 View Post
    Alright I'm going to start building the box in a little bit. i added an extra inch to the height which bump it to 4.25 before displacement. im leaving everything else the same. does anybody else have any input?
    by doing this you changed the tuning also.

    In all honesty, Port is to small. port velocity is way to high and will be audible.
    size is good, but being in a camaro you will hear some port noise. in that box you will have the abilities to reach down into 29hz audible-101hz before it falls flat on its face. good bandwith. Im just worried about the size of the port




    Quote Originally Posted by chillin View Post
    How do you bridge a mono?
    Quote Originally Posted by snoopdan View Post
    throw it off one.
    feedback thread:
    http://www.caraudio.com/forums/buyer-seller-feedback/402726-d-man1s-official-feedback-thread-2.html

  12. #12
    justice66's Avatar
    justice66 is offline Member

    Threadstarter


    Join Date
    Jul 2011
    Location
    Norfolk, VA
    Posts
    122
    Post Thanks / Like
    Mentioned
    5 Post(s)

    Re: Want to buy design and cut sheets.

    yes according to the 12volt box calculator it will be changed by less the 1hz. a box that is 3.9 cubes with a port that is 3 x 11.5 x 18.5 equals 32hz. where as a box that is 4.25 with a port that is 3 x 12.5 x 18.1 equals 32hz. this will be my first complete box that i have built by myself and i have been running all the numbers for the two days. i think my numbers are accurate but i may very well be wrong. Thank you for your input.




  13. #13
    DonH's Avatar
    DonH is offline .....



    Join Date
    Jun 2008
    Location
    So Cal
    Posts
    5,945
    Post Thanks / Like
    Mentioned
    36 Post(s)

    Re: Want to buy design and cut sheets.

    Quote Originally Posted by justice66 View Post
    yes according to the 12volt box calculator it will be changed by less the 1hz. a box that is 3.9 cubes with a port that is 3 x 11.5 x 18.5 equals 32hz. where as a box that is 4.25 with a port that is 3 x 12.5 x 18.1 equals 32hz. this will be my first complete box that i have built by myself and i have been running all the numbers for the two days. i think my numbers are accurate but i may very well be wrong. Thank you for your input.

    i think your missing my main point. PORT AIR VELOCITY. the port is to small. build it and you will hear something a little more than bass frequencies. for more input to help you only if your willing would be having ATLEAST 12in^2 per cubic foot. you have the room so you should take this advice.




    Quote Originally Posted by chillin View Post
    How do you bridge a mono?
    Quote Originally Posted by snoopdan View Post
    throw it off one.
    feedback thread:
    http://www.caraudio.com/forums/buyer-seller-feedback/402726-d-man1s-official-feedback-thread-2.html

  14. #14
    justice66's Avatar
    justice66 is offline Member

    Threadstarter


    Join Date
    Jul 2011
    Location
    Norfolk, VA
    Posts
    122
    Post Thanks / Like
    Mentioned
    5 Post(s)

    Re: Want to buy design and cut sheets.

    Quote Originally Posted by DonH View Post
    i think your missing my main point. PORT AIR VELOCITY. the port is to small. build it and you will hear something a little more than bass frequencies. for more input to help you only if your willing would be having ATLEAST 12in^2 per cubic foot. you have the room so you should take this advice.
    I will deffinitly take any advice. how do i get to 12in^2per cube? what changes do i need to make? a wider port? What would be some good dimensions for the port?




  15. #15
    justice66's Avatar
    justice66 is offline Member

    Threadstarter


    Join Date
    Jul 2011
    Location
    Norfolk, VA
    Posts
    122
    Post Thanks / Like
    Mentioned
    5 Post(s)

    Re: Want to buy design and cut sheets.

    I have laid everything thing out to be cut but havn't made any cuts yet. im playing around with a port calc and i think a port 5 x 12.5 x 32 would be alot bigger while maitain around 32. Am i on the right track?




Closed Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Help please. Need a box design and cut sheet
    By boalova13 in forum Enclosure Design & Construction Help
    Replies: 3
    Last Post: 07-02-2008, 08:38 AM
  2. design and cut sheet needed
    By bones22 in forum Enclosure Design & Construction Help
    Replies: 3
    Last Post: 05-05-2008, 11:52 PM
  3. Need Design And Cut Sheet Asap
    By bones22 in forum Enclosure Design & Construction Help
    Replies: 17
    Last Post: 09-15-2007, 08:11 AM
  4. Want to Buy subwoofer and camera
    By j-memphis in forum Wanting to Buy (WTB) - Car Audio
    Replies: 16
    Last Post: 01-09-2007, 05:53 PM
  5. Anyone want to buy this and trade???
    By RangerMan in forum Subwoofers
    Replies: 14
    Last Post: 10-08-2002, 03:01 PM

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts
1e2 Forum