Member
Hey guys. I'm going to build a new box for my 2 skar vvx 12's. The enclosure I have now came free with the subs. It is about 3.5 ft tuned to about 36 hz. It only has about 10 sq inches of port per cube. Sounds ok, but I believe more port area would be better. I'm thinking 3.5 cubes is good for the pair, but does anyone have any recommendations on tuning and port area? Thanks.
2002 Chevy Tahoe
System in progress:
Sundown SA-12'S
Sudown 1500d and 100.4
Alpine 9887
Mb Quart QSD
High Output SQ
More port area can have more output but not sound better in every case.
2010 Scion tC (May she rest in peice). 2014 Ford Fusion Titanium, all stock
Singer 300 amp, 3 XS D3400s, 4 runs of 1/0
Pioneer 80PRS
JL 450/4v2, 300/2v2, Digital Designs M4
Hertz HSK XL active set, JL ZR800s, Digital Designs 9512s
150db at 36hz, 77/80 MECA Sound Quailty.
I put on
I would aim for like 40-50 in^2 of port tuned in the low 30's. Those skar's like low tuned boxes.
CarAudio.com Elite
OP if you can give them around 4 cubes net for the pair with 40 to 50in^2 with a low 30s tune like Kangaroux suggested I think you will wake em up.....
Last edited by double 07; 07-08-2012 at 10:05 PM.
Member
Thanks guys.
2002 Chevy Tahoe
System in progress:
Sundown SA-12'S
Sudown 1500d and 100.4
Alpine 9887
Mb Quart QSD
doITdaWHITEwayORdoITtwice
is that port via rectangle port or round port?
Here is my feedback Thread: http://www.caraudio.com/forum/showth...ght=fasfocus00
"If you ain't cheatin', You ain't trying"
Member
fasfocus00 the current port is a slot port.
2002 Chevy Tahoe
System in progress:
Sundown SA-12'S
Sudown 1500d and 100.4
Alpine 9887
Mb Quart QSD
Posting Permissions
|
Bookmarks