Tell me if I got this right please!!

[husker77]

Please be gentle first time with sketchup, kinda fun. Here is the design I come up with for the box to put in my kid's s-10 housing a single eclipse 12" aluminum. Just looking for a good sounding musical box mostly. I tried tuning it to around 34hz, but I think the internal volume ended up a little smaller than I figured and the port is a little longer.







sub info

Fs 27 Hz
Qts 0.30
Vas 3.2 Cu Ft
SPL 89.4 db
VCoil Z 3.1 Re Ohm per coil
Power 500/1000 Watts
Qms 5
Qes 0.32
XMax 1.30" 1 way
Sd 511.0 Sq CM

[husker77]

could someone at least tell me if I made any terrible mistakes, port width, sub or port placemet or anything. I am working on another design that hopefully will have a little more volume, so I would like to fix any other issues I got at the same time.

[husker77]

Okay not getting much help, but will keep posting anyway. I think I am going to go with something simple...

18 x 52 x 14 with to flared 4" ports Precision Port 4" Flared Port Tube Kit 268-352, looks like if I make them 7" long it will be tuned about 34.

[husker77]

Okay not getting much help, but will keep posting anyway. I think I am going to go with something simple...

18 x 52 x 14 with two Precision Port 4" Flared Port Tube Kit 268-352, looks like if I make them 7" long it will be tuned about 34.

[husker77]

A little help here?!

It is for a s10 extended cab, I have 52" wide and 14" deep, the height can vary up to 18ish. I was thinking I needed about 4 cubes net.

[Flex68]

Wow....out of all the experienced enclosure builders and in-the-know guys who can tell you how to build a perfect 46th order BP for any sub off the top of their head, nobody can even offer this guy a comment on his box/questions??

dats fukked up

[Below20hzonly]

someone help this fellow

[Flex68]

Wish I could offer some info/insight, OP, but .....

@CAT MAN @Buck @TaylorFade @RAM_Designs @pro-rabbit @Somebody

[Fiendstolemyamp]

I was thinking I needed about 4 cubes net.

Seems a bit large for a single 12. How did you come to this conclusion?

[TaylorFade]

I can't see the pics, Do sub up, ports to the side.

4 cubes does seem big though.

[mazdakid]

That should be pretty close to 4 cubes at 30 hz.
A little bigger than 4 and lower than 30.

[husker77]

Wish I could offer some info/insight, OP, but .....

@CAT MAN @Buck @TaylorFade @RAM_Designs @pro-rabbit @Somebody

Thanks, I always feel guilty doing that. But man I need some help on this, want to get my kids new box built, it is kinda ghetto right now.

Seems a bit large for a single 12. How did you come to this conclusion?

winisd. Got a better recommendation?

I can't see the pics,

hmmmm?

Do sub up, ports to the side. 4 cubes does seem big though.

It is sub up, port up. It would be sub up, port forward, I worried about the port firing right into the seat. Like I said that is what winisd spit out, I thought it seemed a little big also, but I really am green in the enclosure designing part of this.

That should be pretty close to 4 cubes at 30 hz.
A little bigger than 4 and lower than 30.

Will it work okay for a daily?

[Flex68]

Thanks, I always feel guilty doing that. But man I need some help on this, want to get my kids new box built, it is kinda ghetto right now.

np
Folks have prolly just missed seeing your post, as they usually offer up good suggestions for enclosure options.

(Not that I know anything , but the quick calculations I ran online indicates that the pics of your initial plan are well oversized at around 5.66cubes.
One of the calcs I used your T/S parameters in showed a single sub in a very basic rectangular ported enclosure at 1.2cubes and a 6" x 42" cylindrical port.)

Hopefully one of the guys will step in soon who knows whats what...

[RAM_Designs]

First box is ~4.25ft^3 at ~28hz. Count on your power handling being cut in half if using a box that large.

[husker77]

So how big should I go with? I thought it seemed awful big also.