Closed Thread
Results 1 to 2 of 2

Reload Thread: Help with box building and aero port.

  1. #1
    t-scene's Avatar
    t-scene is offline Senior VIP Member



    Join Date
    May 2012
    Location
    Abingdon VA
    Posts
    227
    Post Thanks / Like
    Mentioned
    1 Post(s)

    Help with box building and aero port.

    I wanting to build a box with 2.5 CF after port and woofer displacement. 16H x 22W x 20D with .35 woofer displacement. I want to use one 6 inch aero port that is 18 inches long which should tune the box around 36.80Hz

    But can the port be that close to the side of the box. I was going to put it firing out the side to give it a little more room.


    The box is for a 12" Mmats Juggernaut







  2. #2
    SMS's Avatar
    SMS
    SMS is online now CarAudio.com Elite



    Join Date
    Nov 2010
    Location
    MA
    Posts
    635
    Post Thanks / Like
    Mentioned
    19 Post(s)

    Re: Help with box building and aero port.

    im not a box designer, but i have built alot. using a 18" long port in a 22" wide box will give you 3.25" from end of port to side of box. I would give it atleast 5". You also have to be careful how close you put the output of the port from the side of the trunk or were ever its going. Ive been told to try to keep it around the port dia. away. so you would need 6" or so of dead space between your box and any obstructions. if you add 6" to the width of your box you may have enough air space for an L shaped port firing the same way as your sub




Closed Thread

Similar Threads

  1. Help Designing Box.. Building My First Ported
    By JoeSmith502 in forum Enclosure Design & Construction Help
    Replies: 5
    Last Post: 05-08-2008, 12:33 AM
  2. Replies: 15
    Last Post: 03-05-2008, 06:47 PM
  3. Replies: 1
    Last Post: 10-10-2007, 07:47 PM
  4. Need some help with box building and some questions *PICS*
    By audiobahnuser18 in forum Enclosure Design & Construction Help
    Replies: 3
    Last Post: 02-21-2007, 12:25 PM
  5. Anyone know where i can get some help with box building?
    By BLD 25 in forum Enclosure Design & Construction Help
    Replies: 0
    Last Post: 12-31-2005, 07:27 PM

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts
1e2 Forum