Senior VIP Member
My friend wants to wall of his daily driver, a Jeep Grand Cherokee, with 2 18" Nightshades.
His goal is to get a hairtrick.
Will be ran off an AB VFL500.1, 5300 watts and has the proper electrical.
The space he has to work with is 36'' height 41'' width and 27'' depth.
I have a design but let me know what you think.
36x41x27 , 222 sqin port , tuned to 30 hz , 10.57 cuft net (db, and .3 cuft bracing)
Car: Chevy Cobalt Coupe
Front Stage: Mids: Aura rpm 4", Midbass: Four Aura NS6's
Rear Fill: Pioneer 6x9s
Amps: 2 Rockford Fosgate T400-4's, and a T1500-1BDCP
Electrical: Stock 140amp alt, Big 3, and a SHURiKEN SK-BT100
Winter sub setup: Kicker F12a IB mounted from rear deck
In the works: Diamond D9 12
Senior VIP Member
You need another 2 ft2 if possible... But they will still shine I promise
Senior VIP Member
He is considering doubling up everything, so 1.5" thick all around, do you think that would be necessary or would good bracing be enough?
Car: Chevy Cobalt Coupe
Front Stage: Mids: Aura rpm 4", Midbass: Four Aura NS6's
Rear Fill: Pioneer 6x9s
Amps: 2 Rockford Fosgate T400-4's, and a T1500-1BDCP
Electrical: Stock 140amp alt, Big 3, and a SHURiKEN SK-BT100
Winter sub setup: Kicker F12a IB mounted from rear deck
In the works: Diamond D9 12
Rollin' on 22.5's
I'd vote doubled for overkill, it fits the theme too. 1" particleboard may be an easy button option too. Brace the long spans.
bumpin bluegrass
I wanna hear it if your in michigan
2006 GTO
800prs
Audio System X--ion 70.6 PLUS
Dayton Ref's
Senior VIP Member
Yea I live just south of grand rapids.
anyone have bracing recommendations?
I have never built a box even close to this big before
Car: Chevy Cobalt Coupe
Front Stage: Mids: Aura rpm 4", Midbass: Four Aura NS6's
Rear Fill: Pioneer 6x9s
Amps: 2 Rockford Fosgate T400-4's, and a T1500-1BDCP
Electrical: Stock 140amp alt, Big 3, and a SHURiKEN SK-BT100
Winter sub setup: Kicker F12a IB mounted from rear deck
In the works: Diamond D9 12
SALT PETER
mine is double walled and i only have oneOriginally Posted by caseyarndt
bought from ridinhi,vitveet,dbr,sicaudio and 99grandprixgt, and more ........... sold to player3,foomasta69, pitbull, brodiesel and dragnix 12887 traded with louisiana crx
"noobs that come in the dome will get gang raped!"
nothing but a stock fosgate system with gps and back up camera lol
2012 nissan sentra spec v with some goodies cumming though
I put on
For the sake of doing it right the first time I would definitely double wall it, unless you can weld it all very good. Is this going to be a sealed wall or what? (sealed from the back that is)
Senior VIP Member
yes sealed from the back, port and subs firing forward.
I could put them in separate boxes for added bracing and safer for the subs. then just put a single flush mount baffle(on top of each double baffled box) to connect them and make it look nice
Car: Chevy Cobalt Coupe
Front Stage: Mids: Aura rpm 4", Midbass: Four Aura NS6's
Rear Fill: Pioneer 6x9s
Amps: 2 Rockford Fosgate T400-4's, and a T1500-1BDCP
Electrical: Stock 140amp alt, Big 3, and a SHURiKEN SK-BT100
Winter sub setup: Kicker F12a IB mounted from rear deck
In the works: Diamond D9 12
I put on
At that point I would just double wall it. Get some resin as well and put some coats on all of the joints to help seal it up and make it stronger
Senior VIP Member
ok what should i use for bracing?
Car: Chevy Cobalt Coupe
Front Stage: Mids: Aura rpm 4", Midbass: Four Aura NS6's
Rear Fill: Pioneer 6x9s
Amps: 2 Rockford Fosgate T400-4's, and a T1500-1BDCP
Electrical: Stock 140amp alt, Big 3, and a SHURiKEN SK-BT100
Winter sub setup: Kicker F12a IB mounted from rear deck
In the works: Diamond D9 12
I put on
2x2's, resin and mat around the joints, threaded rod
Posting Permissions
 |
Bookmarks