Closed Thread
Results 1 to 10 of 10

Reload Thread: mustang ported box design help

  1. #1
    gettinlouder's Avatar
    gettinlouder is offline Junior Member



    Join Date
    Jan 2012
    Location
    trenton, michigan
    Posts
    18
    Post Thanks / Like
    Mentioned
    0 Post(s)

    mustang ported box design help

    Iv been trying to find some blue prints for a box for the trunk of the mustang (1995).I'm not sure how much space would be optimal for my subs but they are pioneer champ pros tsw-3002d4. I have found dimensions of a ok sized box that are 13 high 36 wide and 30 deep. I'm wondering if someone can come up with a 34 Hz port for it.Any help appreciated







  2. #2
    brodeisel's Avatar
    brodeisel is offline The Cool Newb



    Join Date
    Jun 2011
    Location
    iowa
    Posts
    4,319
    Post Thanks / Like
    Mentioned
    38 Post(s)

    Re: mustang ported box design help

    Message ram designs or pro rabbit on here.



    Bought from- pjc, boomsday, El Weenie, Sacsking, BassinBuick, Kangaroux
    Sold to- Mast240,

  3. #3
    gettinlouder's Avatar
    gettinlouder is offline Junior Member

    Threadstarter


    Join Date
    Jan 2012
    Location
    trenton, michigan
    Posts
    18
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: mustang ported box design help

    While I'm waiting for a reply from one of them just wondering what would be the greatest amount of airspace my pioneer champ pros the tsw-3002d4 can have or the best amount for them to have if anyone knows please tell really trying to get the info to make a nice box and get this stuff out the house and in the car




  4. #4
    Jmac's Avatar
    Jmac is offline Retired



    Join Date
    Oct 2002
    Location
    Van Isle, BC
    Age
    31
    Posts
    2,274
    Post Thanks / Like
    Images
    14
    Mentioned
    0 Post(s)

    Re: mustang ported box design help

    Just remember with a Mustang that the trunk opening is very small (especially if you have a convertible). Measure your trunk opening before you measure your trunk space to make sure you can get it in comfortably (i.e. not pinching/scraping your fingers).




  5. #5
    gettinlouder's Avatar
    gettinlouder is offline Junior Member

    Threadstarter


    Join Date
    Jan 2012
    Location
    trenton, michigan
    Posts
    18
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: mustang ported box design help

    I should be able to fit a box measuring at 13 high 36 wide and 30 deep, might be 36 deep and 30 wide and I know you have to take the latch off but not sure how to design a port ,wanted it at 34hz.




  6. #6
    pro-rabbit's Avatar
    pro-rabbit is offline Moderator pro-rabbit is a Supporting Member of the forum!

    pro-rabbit is a Supporting Vendor of the forum!

    Join Date
    Jan 2004
    Location
    OKC, OK
    Age
    32
    Posts
    12,395
    Post Thanks / Like
    Mentioned
    373 Post(s)

    Re: mustang ported box design help

    Im waiting to hear back from my friend. As soon as we get his car over here I will have an answer for you.


    I thought you already had a thread on this subject?




  7. #7
    gettinlouder's Avatar
    gettinlouder is offline Junior Member

    Threadstarter


    Join Date
    Jan 2012
    Location
    trenton, michigan
    Posts
    18
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: mustang ported box design help

    Yea I didn't word that good and tried deleting but couldn't figure it out but I will be patient.on just ready to get them in a box, I had them in a sealed box for the mean time bit its pretty small bottom of the sub is at the back wall and sounds like they need some breathing room but thanks again




  8. #8
    iamamp3pimp's Avatar
    iamamp3pimp is offline Bass Heads Entertainment



    Join Date
    Nov 2003
    Location
    Tampa FL
    Age
    33
    Posts
    13,103
    Post Thanks / Like
    Mentioned
    10 Post(s)

    Re: mustang ported box design help

    is it possible for you to go 14 or 13.5 tall?



    www.BassHeadsENT.net for all your custom enclosure needs
    Offering build service and expertise in the Tampa area as well as enclosures shipped nationwide!
    Robin@BassHeadsENT.net


    Check this thread for all the build logs being posted.
    http://www.caraudio.com/forums/suppo...ks-thread.html

  9. #9
    gettinlouder's Avatar
    gettinlouder is offline Junior Member

    Threadstarter


    Join Date
    Jan 2012
    Location
    trenton, michigan
    Posts
    18
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: mustang ported box design help

    Yes the box I had herd about was 13 but the opening is 15 max I just wanted to be safe




  10. #10
    gettinlouder's Avatar
    gettinlouder is offline Junior Member

    Threadstarter


    Join Date
    Jan 2012
    Location
    trenton, michigan
    Posts
    18
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: mustang ported box design help

    Allright haven't hitting much input which o don't blame anyone people have lives, but I have came up with a box the is 13.5 tall 30 wide and 30 long you can go longer if you need but at this size it gives me 5.8 ft.I want to tune it for 34 Hz and the port I came up with is 12.75 tall 3 in wide but its only suppose to be 10.8 in long so I am wondering if it can just go 10.8 inches in the box without turns because I havent been able to figure it out but aero ports go straight in so if anyone can give me some answers would help much because I'm tired of not feeling the bass. Thanks for any input




Closed Thread

Similar Threads

  1. CVX15 Ported Box design help ASAP
    By mackallmike in forum Enclosure Design & Construction Help
    Replies: 4
    Last Post: 12-05-2008, 07:46 AM
  2. Need a AERO port box design, help?
    By ls2poweredgoat in forum Enclosure Design & Construction Help
    Replies: 4
    Last Post: 10-29-2008, 09:33 PM
  3. L7 aero port box design help
    By lowlife502 in forum Enclosure Design & Construction Help
    Replies: 2
    Last Post: 06-11-2008, 10:57 PM
  4. Areo Port Box design- Help please
    By grimreper912003 in forum Enclosure Design & Construction Help
    Replies: 4
    Last Post: 01-11-2008, 01:01 PM
  5. Need ported box design Help!!!
    By Anonymous in forum Enclosure Design & Construction Help
    Replies: 0
    Last Post: 08-13-2007, 12:55 AM

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts

1e2 Forum