Closed Thread
Results 1 to 13 of 13

Reload Thread: Box design help

  1. #1
    KyleBechtold's Avatar
    KyleBechtold is offline Buy my fuses $1.25ea



    Join Date
    Nov 2008
    Location
    Tampa, Florida
    Posts
    7,218
    Post Thanks / Like
    Mentioned
    1 Post(s)

    Box design help

    Hey this is a pretty bad sketch but it wash in paint so forgive me..

    I will try to explain it some first
    far left is an outside wall
    the next wall is the end of the enclosure.. it will have two 3" aeros firing into a loading wall that is 5"s away which is the next wall
    now then is that an appropriate loading wall? should I square off the loading wall or can I keep the the same triangle shape as the rest of the box? I plan on tuning at 35hz as I was told the loading wall can help me still hit the lower frequencies.. Is this a good plan bad design? its the first box I have ever designed at all so help would be great..




    Ca.com


    Bought from: Sctattooer, Korn4Life, wgsj_fortvalley, bk12321, Queball, bumpincrv, Splmaster, 310w6, Buck, liljojo4711
    Everyone I have Bought from has been awesome.. feel safe with any of them..

    Sold To: Iakona, dustinr, squeak12, Worstenemy453, BeAlLsTaR13, rmzsuzuki89, c_b_, mendon mafia, dropped_tb, SPLluminator, violence., power-fanatic07, schackel, michaellane, aviator08, kodak314, dropped_tb
    Ref Link
    Tamparacing
    -b15spec, 727kid, pshull727, Nt_Hardcore


    Want/Need ANL fuses cheap 150a 200a 250a 300a
    CLICK ME




  2. #2
    KyleBechtold's Avatar
    KyleBechtold is offline Buy my fuses $1.25ea

    Threadstarter


    Join Date
    Nov 2008
    Location
    Tampa, Florida
    Posts
    7,218
    Post Thanks / Like
    Mentioned
    1 Post(s)

    Re: Box design help

    aeros big enough? I was thinking maybe some 4"? I don't think 6"s would fit.. as the are like 8+ after flare..



    Ca.com


    Bought from: Sctattooer, Korn4Life, wgsj_fortvalley, bk12321, Queball, bumpincrv, Splmaster, 310w6, Buck, liljojo4711
    Everyone I have Bought from has been awesome.. feel safe with any of them..

    Sold To: Iakona, dustinr, squeak12, Worstenemy453, BeAlLsTaR13, rmzsuzuki89, c_b_, mendon mafia, dropped_tb, SPLluminator, violence., power-fanatic07, schackel, michaellane, aviator08, kodak314, dropped_tb
    Ref Link
    Tamparacing
    -b15spec, 727kid, pshull727, Nt_Hardcore


    Want/Need ANL fuses cheap 150a 200a 250a 300a
    CLICK ME

  3. #3
    Buck's Avatar
    Buck is offline always low Buck is a Supporting Member of the forum!



    Join Date
    May 2008
    Location
    Nashville
    Posts
    18,378
    Post Thanks / Like
    Mentioned
    253 Post(s)

    Re: Box design help

    Do 4's. You want to hit me up? I can check to make sure disp. are right.



    Alpine - ASE (local) - Batcap - C&D Tech - CT Sounds - DC - eD - Excessive Amperage - Rainbow

  4. #4
    KyleBechtold's Avatar
    KyleBechtold is offline Buy my fuses $1.25ea

    Threadstarter


    Join Date
    Nov 2008
    Location
    Tampa, Florida
    Posts
    7,218
    Post Thanks / Like
    Mentioned
    1 Post(s)

    Re: Box design help

    alright will do 4s.. other than that is the design fine.. what displacement you talking about? sub, port?



    Ca.com


    Bought from: Sctattooer, Korn4Life, wgsj_fortvalley, bk12321, Queball, bumpincrv, Splmaster, 310w6, Buck, liljojo4711
    Everyone I have Bought from has been awesome.. feel safe with any of them..

    Sold To: Iakona, dustinr, squeak12, Worstenemy453, BeAlLsTaR13, rmzsuzuki89, c_b_, mendon mafia, dropped_tb, SPLluminator, violence., power-fanatic07, schackel, michaellane, aviator08, kodak314, dropped_tb
    Ref Link
    Tamparacing
    -b15spec, 727kid, pshull727, Nt_Hardcore


    Want/Need ANL fuses cheap 150a 200a 250a 300a
    CLICK ME

  5. #5
    KyleBechtold's Avatar
    KyleBechtold is offline Buy my fuses $1.25ea

    Threadstarter


    Join Date
    Nov 2008
    Location
    Tampa, Florida
    Posts
    7,218
    Post Thanks / Like
    Mentioned
    1 Post(s)

    Re: Box design help

    anyone? I know someone online has made some boxes before.. cmon..



    Ca.com


    Bought from: Sctattooer, Korn4Life, wgsj_fortvalley, bk12321, Queball, bumpincrv, Splmaster, 310w6, Buck, liljojo4711
    Everyone I have Bought from has been awesome.. feel safe with any of them..

    Sold To: Iakona, dustinr, squeak12, Worstenemy453, BeAlLsTaR13, rmzsuzuki89, c_b_, mendon mafia, dropped_tb, SPLluminator, violence., power-fanatic07, schackel, michaellane, aviator08, kodak314, dropped_tb
    Ref Link
    Tamparacing
    -b15spec, 727kid, pshull727, Nt_Hardcore


    Want/Need ANL fuses cheap 150a 200a 250a 300a
    CLICK ME

  6. #6
    Buck's Avatar
    Buck is offline always low Buck is a Supporting Member of the forum!



    Join Date
    May 2008
    Location
    Nashville
    Posts
    18,378
    Post Thanks / Like
    Mentioned
    253 Post(s)

    Re: Box design help

    Well, all of them. Box size, sub and port displacements. Just double checking your work if you want me to.



    Alpine - ASE (local) - Batcap - C&D Tech - CT Sounds - DC - eD - Excessive Amperage - Rainbow

  7. #7
    KyleBechtold's Avatar
    KyleBechtold is offline Buy my fuses $1.25ea

    Threadstarter


    Join Date
    Nov 2008
    Location
    Tampa, Florida
    Posts
    7,218
    Post Thanks / Like
    Mentioned
    1 Post(s)

    Re: Box design help

    square is 3x20x43 = 1.49
    triangle 9x20x43/2= 2.24
    3.73

    3/4" wood disp
    1.19 disp
    -.37 back wall
    -.22 bottom
    -.41 front wall
    -.08 both side wall triangles
    -.05 both side wall squares
    -.06 top


    2.54 after displacement of the wood.. correct me if I am wrong..


    Wall dimensions
    back 20x43
    top 3x43
    front 22x43
    bottom 12x43
    side triangles 20x9 x2
    side squares 3x20 x2

    can't find subs but if I did
    5.25 mounting depth x area of magnet diameter(6.25)x 4 of em
    I get .37 for all 4..

    so thats 2.17 after displacement before ports...

    1/2" wood
    .78 disp

    b .25
    t .04
    f .27
    b .15
    st .05
    ss .02

    thats approximately the box.. 1/2 I understand is probably not ideal.. but I am thinking do that and run some all thread for bracing..



    Ca.com


    Bought from: Sctattooer, Korn4Life, wgsj_fortvalley, bk12321, Queball, bumpincrv, Splmaster, 310w6, Buck, liljojo4711
    Everyone I have Bought from has been awesome.. feel safe with any of them..

    Sold To: Iakona, dustinr, squeak12, Worstenemy453, BeAlLsTaR13, rmzsuzuki89, c_b_, mendon mafia, dropped_tb, SPLluminator, violence., power-fanatic07, schackel, michaellane, aviator08, kodak314, dropped_tb
    Ref Link
    Tamparacing
    -b15spec, 727kid, pshull727, Nt_Hardcore


    Want/Need ANL fuses cheap 150a 200a 250a 300a
    CLICK ME

  8. #8
    Buck's Avatar
    Buck is offline always low Buck is a Supporting Member of the forum!



    Join Date
    May 2008
    Location
    Nashville
    Posts
    18,378
    Post Thanks / Like
    Mentioned
    253 Post(s)

    Re: Box design help

    Whoa this box is a different size than I thought it was.



    Alpine - ASE (local) - Batcap - C&D Tech - CT Sounds - DC - eD - Excessive Amperage - Rainbow

  9. #9
    KyleBechtold's Avatar
    KyleBechtold is offline Buy my fuses $1.25ea

    Threadstarter


    Join Date
    Nov 2008
    Location
    Tampa, Florida
    Posts
    7,218
    Post Thanks / Like
    Mentioned
    1 Post(s)

    Re: Box design help

    New dimensions..
    25"H x 43L x 12bw x 2tw

    square 25x2x43 1.24
    triangle 25x10x43 3.11
    total before disp 4.35



    Ca.com


    Bought from: Sctattooer, Korn4Life, wgsj_fortvalley, bk12321, Queball, bumpincrv, Splmaster, 310w6, Buck, liljojo4711
    Everyone I have Bought from has been awesome.. feel safe with any of them..

    Sold To: Iakona, dustinr, squeak12, Worstenemy453, BeAlLsTaR13, rmzsuzuki89, c_b_, mendon mafia, dropped_tb, SPLluminator, violence., power-fanatic07, schackel, michaellane, aviator08, kodak314, dropped_tb
    Ref Link
    Tamparacing
    -b15spec, 727kid, pshull727, Nt_Hardcore


    Want/Need ANL fuses cheap 150a 200a 250a 300a
    CLICK ME

  10. #10
    KyleBechtold's Avatar
    KyleBechtold is offline Buy my fuses $1.25ea

    Threadstarter


    Join Date
    Nov 2008
    Location
    Tampa, Florida
    Posts
    7,218
    Post Thanks / Like
    Mentioned
    1 Post(s)

    Re: Box design help

    Drawing of new dimensions.. the max distance is edge of sub to outside wall.. distance to port opening will be smaller obviously.. is this enough room?



    The question on the bottom is, somewhere between the subs and the ports should I put something or is it fine just shooting right into the port?

    and those are 4" aeros now sorry



    Ca.com


    Bought from: Sctattooer, Korn4Life, wgsj_fortvalley, bk12321, Queball, bumpincrv, Splmaster, 310w6, Buck, liljojo4711
    Everyone I have Bought from has been awesome.. feel safe with any of them..

    Sold To: Iakona, dustinr, squeak12, Worstenemy453, BeAlLsTaR13, rmzsuzuki89, c_b_, mendon mafia, dropped_tb, SPLluminator, violence., power-fanatic07, schackel, michaellane, aviator08, kodak314, dropped_tb
    Ref Link
    Tamparacing
    -b15spec, 727kid, pshull727, Nt_Hardcore


    Want/Need ANL fuses cheap 150a 200a 250a 300a
    CLICK ME

  11. #11
    KyleBechtold's Avatar
    KyleBechtold is offline Buy my fuses $1.25ea

    Threadstarter


    Join Date
    Nov 2008
    Location
    Tampa, Florida
    Posts
    7,218
    Post Thanks / Like
    Mentioned
    1 Post(s)

    Re: Box design help

    anybody?
    comments
    ideas
    anything?



    Ca.com


    Bought from: Sctattooer, Korn4Life, wgsj_fortvalley, bk12321, Queball, bumpincrv, Splmaster, 310w6, Buck, liljojo4711
    Everyone I have Bought from has been awesome.. feel safe with any of them..

    Sold To: Iakona, dustinr, squeak12, Worstenemy453, BeAlLsTaR13, rmzsuzuki89, c_b_, mendon mafia, dropped_tb, SPLluminator, violence., power-fanatic07, schackel, michaellane, aviator08, kodak314, dropped_tb
    Ref Link
    Tamparacing
    -b15spec, 727kid, pshull727, Nt_Hardcore


    Want/Need ANL fuses cheap 150a 200a 250a 300a
    CLICK ME

  12. #12
    surreal's Avatar
    surreal is offline On my katy perry sht



    Join Date
    Jan 2010
    Location
    OK
    Posts
    615
    Post Thanks / Like
    Mentioned
    3 Post(s)

    Re: Box design help

    Really long/skinny box can act like a line.. I would speak the subs out from the picture, not that you could mount them that way due to depth anyway.
    I just skimmed over but its obviously a truck box? Fire into the passenger side a few inches away and youre good to go.



    I do stuff

  13. #13
    KyleBechtold's Avatar
    KyleBechtold is offline Buy my fuses $1.25ea

    Threadstarter


    Join Date
    Nov 2008
    Location
    Tampa, Florida
    Posts
    7,218
    Post Thanks / Like
    Mentioned
    1 Post(s)

    Re: Box design help

    1. yes its a truck box
    2. speak the subs out from the picture??
    3. I have always heard fire into drivers side?



    Ca.com


    Bought from: Sctattooer, Korn4Life, wgsj_fortvalley, bk12321, Queball, bumpincrv, Splmaster, 310w6, Buck, liljojo4711
    Everyone I have Bought from has been awesome.. feel safe with any of them..

    Sold To: Iakona, dustinr, squeak12, Worstenemy453, BeAlLsTaR13, rmzsuzuki89, c_b_, mendon mafia, dropped_tb, SPLluminator, violence., power-fanatic07, schackel, michaellane, aviator08, kodak314, dropped_tb
    Ref Link
    Tamparacing
    -b15spec, 727kid, pshull727, Nt_Hardcore


    Want/Need ANL fuses cheap 150a 200a 250a 300a
    CLICK ME

Closed Thread

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts
1e2 Forum