Closed Thread
Results 1 to 2 of 2

Reload Thread: enclosure assistance easy

  1. #1
    mrtopnotch561's Avatar
    mrtopnotch561 is offline Junior Member



    Join Date
    Jun 2011
    Location
    west palm beach, fl
    Posts
    28
    Post Thanks / Like
    Mentioned
    0 Post(s)

    enclosure assistance easy

    ok when im constructing a enclosure. i want to end up with about 2.5 cu ft. my subs displacement is .14 and im going to do a slot port tuned to 30 hz. How can i find out what the port displacement would be or can anybody tell me how many cu ft the enclosure would have to be to make sure after displacement it comes out to about 2.5 cu ft? any help is appreciated







  2. #2
    pro-rabbit's Avatar
    pro-rabbit is offline Moderator pro-rabbit is a Supporting Member of the forum!

    pro-rabbit is a Supporting Vendor of the forum!

    Join Date
    Jan 2004
    Location
    OKC, OK
    Age
    32
    Posts
    12,395
    Post Thanks / Like
    Mentioned
    373 Post(s)

    Re: enclosure assistance easy

    you need figure out your port area then adjust the length to get your tuning. Then take the H x W x Length of the port and divide it by 1728 to get your displacement of the port. Be sure to add .75 to the wide for the thickness of the wood.




Closed Thread

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts

1e2 Forum