Senior VIP Member
I need to know some kind of specs for height, width, and depth so I can get 4 cubes after port displacement, also I would like a design that takes those specs and designs a box tuned to 33-34 hz with 15-17 sq in of port. I am going to have sub up port forward and the top will have a double baffle flush mounted and internally braced using dowel rods. I will pay 8$(my pp balance) for anyone who can design this to the top specs.
98 civic
Jvc deck
5.25 alpine type r comps upfront
6.5 hifonics comps in the rear
Speakers amp-Rockford 300-4
Sub amp-Us md1d
Sub-18" rd audio v2 motor with psi soft parts
box-4.5 cubes at 33hz
150 amp alt
102ah bat in the back
Bannned
Buck does it for $1. RAM_Designs does designs as well, but I don't know his pricing.
Originally Posted by globalminds_ent
ThugStep
yea i was gonna say try buck. can't go wrong there.
Senior VIP Member
i have built and designed before, and just found re's boxbuilder after it went off the radar, but my only problem is finding a box that fits, i guess ill have to use cardboard to build an identical before going through with the box. so far i have 4.1 net cubes with 63 sq in of port with a tuning(before sub displacement) of 33.7
98 civic
Jvc deck
5.25 alpine type r comps upfront
6.5 hifonics comps in the rear
Speakers amp-Rockford 300-4
Sub amp-Us md1d
Sub-18" rd audio v2 motor with psi soft parts
box-4.5 cubes at 33hz
150 amp alt
102ah bat in the back
I put on
rams a nice guy too
Posting Permissions
 |
Bookmarks