I'm building a ported enclosure (firing subs up/ports up) for 3 first version 10W6s to be driven by a Crossfire CFA1000D @ 1ohm in a 2nd gen. Eagle Talon.
I have the box layed out as a common enclosure for all 3 subs, with a net volume around 3.1 cu/ft. I'd like to use two 3" ports to tune the box, but am not sure what the best frequency would be. JLs spec sheet show their recommended enclosure tuned to ~30Hz.
I'm thinking of tuning it to around 28-30Hz, but don't know what would be best for these subs--higher or lower. I'm looking for loud, boomy bass, best suited for rap/hip-hop.
Thanks for your help.