Box pics in full effect

[LoneRanger]

For some reason the forum is not allowing me to add pics and my webmaster's not awake to add new pics to my domain, so i'll just link 'em from the ol geoshitties account. For those of you who don't know about the shittiness of geocities, you have to paste the link in a new browser window instead of clicking on it.

www.geocities.com/donnballenger/dansw7box.JPG
http://www.geocities.com/donnballeng...ruckwedge1.JPG
http://www.geocities.com/donnballeng...2cftsealed.JPG

will post more soon

[jbl_marshall21]

links don't work

[nosaj070]

Gotta copy and paste, but 2nd link is this

"http://www.geocities.com/donnballenger/johntruckwedge1.JPG"

3rd is this
"http://www.geocities.com/donnballenger/twin2cftsealed.JPG"

without quotes obviously

[LeXtreme]

Hey, LoneRanger or someone is it alright to have for that second pic you have there, i have a 10" box like that but isn't quite as wide, to have a 500w 10" in each...?, non-ported?

[staggs]

Hey LeXtreme:

I didn't quite understand your question, but that would be my box that your takling about. It's going to go in my s-10, for 10" eD subs. it's a sealed box, and each chamber has .75 (donn correct me if i'm wrong).

Any word from your shipping lady yet Donn?

[LeXtreme]

Hey im just asking if my two 500w subs will go in this box.. which is:

85cm long
30cm high
20cm bottom width
14cm top width (front is on a slope)

looks like this:
http://lextangle.orcon.net.nz/10inchsubbox.jpg

what im asking is will they sound good, in that without a port without fear of damaging, etc?...(dont' know exact chamber measurements)...so yours is the blue box, thats not bad at all, larger than my box.

[LoneRanger]

Hey im just asking if my two 500w subs will go in this box.. which is:

85cm long
30cm high
20cm bottom width
14cm top width (front is on a slope)

looks like this:
http://lextangle.orcon.net.nz/10inchsubbox.jpg

what im asking is will they sound good, in that without a port without fear of damaging, etc?...(dont' know exact chamber measurements)...so yours is the blue box, thats not bad at all, larger than my box.

In english units please!

it's not blue...it's medium gray. bad lighting makes it look blue.

[LeXtreme]

Haha oh yeah, US units, so wat you want in inchs or feet:

34 inches, 2.8ft long
12 inches, 1ft high
8 inches, 0.7ft bottom width
5.5 inches, 0.5fttop width

yeah thats them then!

[kevin85193]

Cant wait for my box

[smullen]

For some reason the forum is not allowing me to add pics and my webmaster's not awake to add new pics to my domain, so i'll just link 'em from the ol geoshitties account. For those of you who don't know about the shittiness of geocities, you have to paste the link in a new browser window instead of clicking on it.

www.geocities.com/donnballenger/dansw7box.JPG
www.geocities.com/donnballenger/johntruckwedge1.JPG
www.geocities.com/donnballenger/twin2cftsealed.JPG

will post more soon

I like your work.... Unfourtunatly, for me... It looks better than mosta the shops around here too...

Hey about how much would one of your vented enclosures like this one on your geocites page be
http://www.geocities.com/donnballenger/mybox5.JPG
(I guess I'd need about 2.5^feet, I'll decide what to tune it to later when its ordered and be open to your suggestions on that?)

How much to ship to St. Louis, Mo???

I'd like pretty much like it is there with the rings, but no fiberglass... I wanna do the glass work on it myself and add an small amprack too...

Also can the port be on the same baffleface as the sub??? Or will it not work as well? I am pretty new to the science of vented and tuning...

Oh, this will be for a 12" XXX for another temp setup till I can get my ride bagged and wall in...

[LoneRanger]

I like your work.... Unfourtunatly, for me... It looks better than mosta the shops around here too...

Hey about how much would one of your vented enclosures like this one on your geocites page be
http://www.geocities.com/donnballenger/mybox5.JPG
(I guess I'd need about 2.5^feet, I'll decide what to tune it to later when its ordered and be open to your suggestions on that?)

How much to ship to St. Louis, Mo???

I'd like pretty much like it is there with the rings, but no fiberglass... I wanna do the glass work on it myself and add an small amprack too...

Also can the port be on the same baffleface as the sub??? Or will it not work as well? I am pretty new to the science of vented and tuning...

Oh, this will be for a 12" XXX for another temp setup till I can get my ride bagged and wall in...

those little rings are a pain in the *** to make, but it can be done. fill out my quote request form at www.gnomeaudio.com/quote.php and i'll get back with you.

[staggs]

Hey Donn, any word on if my box has shipped yet (made it into the hands of UPS, and not that annoying lady).

Thanks!

[smullen]

those little rings are a pain in the *** to make, but it can be done. fill out my quote request form at www.gnomeaudio.com/quote.php and i'll get back with you.

OK Filled it out.. Thanks

[LoneRanger]

Hey Donn, any word on if my box has shipped yet (made it into the hands of UPS, and not that annoying lady).

Thanks!

john-

it went out yesterday for sure. i took my lawyer buddy down there and he gave her three kinds of hell and we actually watched them put the boxes on the truck. she's supposed to email me later today with the tracking numbers.

the best part of it is that he's not even a civil or litigation lawyer....just a tax lawyer

[staggs]

Sounds good, If she happens to send you the tracking numbers, just icq or e-mail it to me (shomehow i bet she don't give them to you heh). I figure I should have the box in my hands by friday (hopefully)