Have an '08 SX4 and want space back but want to keep the thump. Rough huh.
I have 18x14x9 roughly under each front seat. ~.9 cubes gross.
And I have found a way to make a wall that only takes up the upper portion of the hatch area that can be ~37x8x12. 1.4 cubes gross.
I'm looking @ SA 8's and DD1508's currently.
Any other ideas are WELCOME.
My main problem is port length, placement.
Help is very appreciated. This is bending my brain over the kitchen counter.
(Current Setup DC Lvl 4 12" in 1.8 @ 32hz. 1200rms on tap.) Way too big.
Also, considered false floor. But Then mounting depth became problematic.
Sorry for the rant.