Is anyone in the mood to help me build a ported box for 2 8" subs?
After a few weeks of research, I think i have all the stuff i need for my install except for a box.
I'll be running 2 Sundown SA-8 Subs powered by a SAE-1200D v2.
Basically, i need a cut list and maybe some diagrams for a 1.75cf ported box tuned to 35hz. The subs will be in my daily driver, and i prefer for the setup to be tuned towards SQ rather than SPL. If anyone recommends a different volume or a different hz value to tune to, i'm open to suggestions.
Also, I want to build up a checklist so i make sure i get all i need from Home Depot. So far, this is what i've gathered from a crutchfield article:
Electric drill with bits for pre-drilling screw holes and driving screws
3/4" MDF (medium density fiberboard)
2" drywall screws
Panhead sheet metal screws (1/2" and 3/4")
Non-hardening rope caulk
Speaker terminal cup (what is this?)
is there anything im missing?
Car: 2009 Toyota Camry XLE