2006 Silverado 10" box problem

[Tgilchrist]

Id like to just get a premade box for my 2 10w7's because the design for underneath my back seats is a little complicated. I cant find one place or site that has dual ported 10" box that would fit my truck. Ive found plenty of sealed but i listen to mostly rap and rock and i know 10's are really for tighter bass but if i had a ported box ill still get the deeper sounding bass that i want.

[Johnny Law.Lulz]

Size has almost nothing to do with how the bass sounds

[Tgilchrist]

Im not even worried about the size but the size does effect what the subwoofer hits best. I just wanted to kno if anyone knew any good sites that had ported truck boxs

[rosshimself13]

i have seen people on this site with boxes under the seat on your model truck, most said10's fit ok 12's usually require raising the rear bench, but you ddnt specify which cab you have, so nobody knows that either... also prefab boxes are almost never tuned to sound good

[Sir-Lancelot]

Audible Customs in Louisiana or Fisher Customs somewhere in the midwest can build you a box or you can find someone in a good mood to help you with plans and a cut sheet. Take it to Lowes or Home Depot and they will cut it out for you at no charge.

Whatever you do, don't buy a prefab box. It will **** azz even with the best woofer money can buy.

[Tgilchrist]

Yeah im starting to find that out lol none of the prefab boxs come close to the cu. inchs the 10w7's need. Ive built acouple regular sqaure boxs i guess ill just have to do my homework to build this one.

[DBBOOM]

Most of the underseat prefabs have ~.75cu.ft. per chamber. Only enough for a sealed 10. Build your own.

[on1wheel01]

Most of the underseat prefabs have ~.75cu.ft. per chamber. Only enough for a sealed 10. Build your own.

this

[on1wheel01]

Most of the underseat prefabs have ~.75cu.ft. per chamber. Only enough for a sealed 10. Build your own.

this

[GI JOEY]

Do like me. Just lift your seat 2" and fire the subs forward thenport to the sides. Look up my build in the build log section.

[Joseph K]

Build your own box. Or get someone to build one for you. It isn't too hard to work with MDF