Closed Thread
Results 1 to 3 of 3

Reload Thread: what size slot?

  1. #1
    robertoyoung08's Avatar
    robertoyoung08 is offline CarAudio.com Elite



    Join Date
    Aug 2009
    Location
    bay area, ca
    Posts
    1,230
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    75 Post(s)

    what size slot?

    have another thread on figuring out aeros. fasfocus helped but now im getting people saying its not right.

    until the aeros come together i will have a slot port.

    need 2.5cubes at 35hz

    30w x 14h x 15d gives me about 2.5 after sub displacement

    what lengths and height should the slot be?

    (does the enitre slot port area also count as displacement? my above net volume is assuming its a sealed. idk if the port would also take away?)

    thanks again guys. this site has been real helpful since i found it. hope i can help some of you guys out whenever i can in return!







  2. #2
    robertoyoung08's Avatar
    robertoyoung08 is offline CarAudio.com Elite

    Threadstarter


    Join Date
    Aug 2009
    Location
    bay area, ca
    Posts
    1,230
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    75 Post(s)

    Re: what size slot?



    going the re way for now since i dont have any responses yet.
    do these re calculations look right?
    thanks again.




  3. #3
    marcotheclepto's Avatar
    marcotheclepto is offline CarAudio.com Veteran



    Join Date
    Feb 2009
    Location
    United States
    Posts
    2,464
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    1 Post(s)

    Re: what size slot?

    have another thread on figuring out aeros. fasfocus helped but now im getting people saying its not right.

    until the aeros come together i will have a slot port.

    need 2.5cubes at 35hz

    30w x 14h x 15d gives me about 2.5 after sub displacement

    what lengths and height should the slot be? depends on whic hway its facing. back up et cetera. subtract 1.5 from that sides length.you'll want 25-40 sq in of port area. depending on the sub your using. example with that box if you were going to have port facing rear. the port would be 12.5 tall x 2~3.5wide.the length will then vary based on whaat size the port is.
    (does the enitre slot port area also count as displacement? my above net volume is assuming its a sealed. idk if the port would also take away?)
    yes the ports displacement must also be taken into account. if youd like some more help with this id be more than glad to help you via pm. or i can do you a design with 3D sketch for a small fee.
    thanks again guys. this site has been real helpful since i found it. hope i can help some of you guys out whenever i can in return!some of us try to help whenever we can glad to hear you plan to be a positive contributor



    need a box design? click here or email [email protected]
    1997 Buick LeSabre Limited
    wiring:2 runs (2 pos 2 neg) of 0 ga big 3 in 0 ga 50 ft of knu cca, and 36 ft of the wire loudcartunez sells...
    Head unit: Kenwood excelon KDC-X692
    Sub Amp: Autotek Mean Machine 4000D
    Subs: 2 custom 15s built by ssackett
    Sub box: 4th order bandpass 2.52 cubes sealed 5 cubes ported tuned to 59 Hz
    comp amp: CDT SQA4100
    Comps: 2 sets of CDT CL-61i
    Deadening: 50 cld tiles and 20 sq ft of damp pro.
    feedback please post if you have had any transactions.
    http://www.caraudio.com/forum/showth...19#post6113819

Closed Thread

User Tag List

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts
1e2 Forum