I'm building a box for my SPL-12s.
I'm using 3/4" mdf as it is the largest I can buy.
I have 1-3/4" deck screws. They are splitting the MDF.
What should I use to put the box together with? Drywall screws?
CarAudio.com Elite
I'm building a box for my SPL-12s.
I'm using 3/4" mdf as it is the largest I can buy.
I have 1-3/4" deck screws. They are splitting the MDF.
What should I use to put the box together with? Drywall screws?
Originally Posted by stuckinok
CarAudio.com Elite
pre drill the holes...
2008 toyota tundra c-max trd
6inch procomp lift, 35" rubber on 20"s
pioneer avic x930bt,
focal polyglass 165vb. front stage
some image dynamics coaxs for the rear
ssa icon 10"
aq 2200
ppi pcx2400
DO WORK! (if u can)
do not do not use drywall screws go get 1 5/8" deck screws they are gray and coated trust
feedback thread
http://www.caraudio.com/forum/showth...appa5+feedback
lol the moderators here are GODS word to the wise
"don't cross them lol
Shaggy DOA
1 5/8" coarse drywall screws work perfectly fine, just predrill with a 3/32" bit the full length of the screw...
CarAudio.com Elite
I ended up getting 1-5/8" fine thread drywall screws.
The holes were pre drilled. And counter sunk too.
CarAudio.com Elite
what amp are you using for them?
2008 toyota tundra c-max trd
6inch procomp lift, 35" rubber on 20"s
pioneer avic x930bt,
focal polyglass 165vb. front stage
some image dynamics coaxs for the rear
ssa icon 10"
aq 2200
ppi pcx2400
CarAudio.com Elite
No idea.
Posting Permissions
 |
Bookmarks