1. ## box design help please

can someone design me a new box for my RE SE 15. displacement is 0.17 ft^3
4 cubic foot after all displacement, and i want angles in the corner of the port and angled port. tuned around 35hz.

or can someone teach me how to figure it all out? =]

thanks

3. ## Re: box design help please

its going in a impreza hatch, so around 35" wide, 30 deep, and how ever tall

4. ## Re: box design help please

i'm still confused on the angled port thing...search google for a box calculator...i like rockford fosgates.

5. ## Re: box design help please

just like this box http://www.caraudio.com/forum/showth...48#post6473948
its pretty much the size i need to

box is going to go in a 97 subi impreza hatchback..
i dont have the car yet, because i have to go to Minnesota to get it from my uncle

6. ## Re: box design help please

so hit up d_man 1 he'll quote it for you
if not lmk i'll give you a quote

7. ## Re: box design help please

i will build it.. i just dont know how to figure out the what the port length should be.. i want a pretty wide port. my box right now has a 5" wide port =] .

8. ## Re: box design help please

have you tried to google "port calculator"? You will find some very useful calculators...

9. ## Re: box design help please

Originally Posted by uGotF-ckedUp
i will build it.. i just dont know how to figure out the what the port length should be.. i want a pretty wide port. my box right now has a 5" wide port =] .
you don't want to go to wide
to much port area can also be bad
so if a 5" wide by w/e port equals 25 in^2 of port area per ft^3 it may not work well this is why port tunning is so imPORTant /rule of thumb for slots is 12-16 in^2 per ft^3 of net volume
that being said I've gone both bigger and smaller with good results and with not so good results
it all depends on set up box/subs/vehicle/imp rise/voltage/etc......
not to be a DB but you should hit up some one to DESIGN you an enclosure
you can still build it but that way you kno what the outcome will be b-4 building it so no after building most guys here will charge \$5-15
some will do it free / some will give you simple design and some will provide cutsheets and assembly sheets (so easy ,a caveman could do it ) so it is worth it to ask for design quotes and get it right 1st time /not that you wouldn't but better to be sure
hope this helped srry to be so long winded

10. ## Re: box design help please

port is 5" by 12.5 inches. so thats what 62.5in^2?
box is 3.5ft^3 and tuned at 35 hz

11. ## Re: box design help please

wow how long is that thing 30+ inches??
and it's not too oversized it's only 17 in^2 per cube so you good there

12. ## Re: box design help please

Here's a free design I made a while back. It's pretty much exactly what you need. The port will be side-firing, though. With your width, that shouldn't be a problem.

13. ## Re: box design help please

Originally Posted by dappa5
wow how long is that thing 30+ inches??
and it's not too oversized it's only 17 in^2 per cube so you good there
i dont remember for sure but i think the box is 30" x 30" x 14"
port is 29 1/4" long

heres a pic of the box

14. ## Re: box design help please

hey bro! u need a design right.... my pm thingy is acting all ghey!

i can shoot a design togethar right quick and accurate for u with cutsheet and simple directions on how to construct for 10 bux.... also if u wanted i can put a list of what everything u will need for construction to finish! i charge a flat \$10.90 through paypal... LMK BRO!

and to explain the 45 degree in the corner of the port.... it is so the corner of the port will have continuous width and not get larger then smaller again like in a corner ....

15. ## Re: box design help please

what a coincidence that's what I charge lol

#### Posting Permissions

• You may not post new threads
• You may post replies
• You may post attachments
• You may edit your posts