This is a design that I've been working on for boomintahoe. Figured I'd post some pictures and get your opinons. It still needs a little work to integrate the plate amp into it. I'll have to make a separate chamber on the back for it.
Anyways, this enclosure is for a single 8" Dayton subwoofer. It will be used in a home theater setup. This enclosure is a transmission-line style enclosure and has a line length of 11.5' (yes, that's feet, not inches) and is tuned to 25Hz
Laying down some guidelines... this gets tedius
Port line walls mapped out... all 11.5 feet of it Pain in the *** measuring out all of those ****ed 45 degree braces...
Walls put up
Hole for sub.
Just realized though that the dayton 8" driver has a big *** magnet assembly and has a 4.5" mounting depth. Looks like I'll have to figure out something with the baffle or the sub will have to be ran inverted because the port is only 2" wide.