RE SRx box
I modelled in WinISD, attached in ZIP file a project file.
I do not want to take up my entire trunk so space is an issue. At this point im weighing to make a 2.5 @ 28hz vented enclosure or a 2cubes sealed box. It shows transient gain as me picking up only a couple decibles from the ported enclosure, but it helps quite a bit on improving bass between 20-50 hz.
SQ here at this point, and will be giving it 600 rms ( it is recommended 300rms ).
Its a 15".
P.S One problem is I have 16.5" of height clearance for my box, and the driver is over 15" total
Re: RE SRx box