Closed Thread
Results 1 to 3 of 3

Reload Thread: Building Box Inside Car

  1. #1
    Slaymon's Avatar
    Slaymon is offline I need new audio eqiup



    Join Date
    Jun 2002
    Location
    Indianapolis, IN
    Age
    33
    Posts
    722
    Post Thanks / Like
    Images
    2
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Building Box Inside Car

    Would L brackets hold the box together just as good as if I were to just screw the piece of wood from the outside? I won't be able to screw it in from the outside and was wondering if L brackets inside the wood would hold it together as good? I will also be using a 2x2" for bracing on the inside.. Would the box still hold together pretty good with that? Any help would be great..



    '97 Grand Prix GTP

    Pioneer DEH-P3600
    2 12" RE SeXXX's
    1 Soundstream Picasso 880.2
    Looking for a new amp sooner or later!


    AIMslaydog130
    [email protected]




  2. #2
    Trixter's Avatar
    Trixter is offline Keepin it Simple



    Join Date
    Apr 2002
    Location
    Colorado Springs, CO
    Age
    39
    Posts
    2,609
    Post Thanks / Like
    Images
    29
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    2 Post(s)

    Re: Building Box Inside Car

    I used angle iron that had holes in it when I did mine. Check out my gallery.



    2006 Jeep Liberty
    Adire Audio 15" Brahma running off Cadence A7hc, Clarion hu, MB Quart 6.5s and 5.25s running off old school Punch 800a4

    146+db @ 38hz with 1200w and a single 15"

    Lv = [(14630000 x R^2) / (Fb^2 x Vb)] - 1.463R
    *Vb = vol. in cu"
    **R = sq.rt. A / Pi (for square/slot port)

  3. #3
    Matador's Avatar
    Matador is offline -= StillBumping =-



    Join Date
    Oct 2002
    Location
    Ca
    Posts
    2,093
    Post Thanks / Like
    Images
    2
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: Building Box Inside Car

    Quote Originally Posted by Slaymon
    Would L brackets hold the box together just as good as if I were to just screw the piece of wood from the outside? I won't be able to screw it in from the outside and was wondering if L brackets inside the wood would hold it together as good? I will also be using a 2x2" for bracing on the inside.. Would the box still hold together pretty good with that? Any help would be great..

    i m guessin it should hold it together. just use plenty of liquid nail tho. and i guess pput brackets every 4-6inch i tihnk it is (same distance apart between screws if u were to use them)




Closed Thread

Similar Threads

  1. im a newb to box building... help me out
    By rocktonic13 in forum Enclosure Design & Construction Help
    Replies: 3
    Last Post: 02-29-2004, 11:54 AM
  2. building a ported box (2cu ft) for 10 inch
    By jlaudiow6 in forum Enclosure Design & Construction Help
    Replies: 0
    Last Post: 10-08-2003, 01:52 PM
  3. Building box for a 1800WRMS system
    By ferret7cs in forum Enclosure Design & Construction Help
    Replies: 4
    Last Post: 09-23-2003, 01:13 PM
  4. box volume?
    By vod88 in forum Enclosure Design & Construction Help
    Replies: 0
    Last Post: 09-13-2003, 02:25 AM

User Tag List

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts
1e2 Forum