Walling of my integra

[jmkanek]

im seriously considering building a wall in my 95 integra, im thinking of either going 2 18s 4 12s or what i wanna do is put 4 15s if i have the room, box will be close to 18 cubes gross or somewhere close to that, does anybody think i could fit 4 15s on the front with a nice port, or should i just get 4 12s or 2 18s. any help would be greatly appreciated.

[Mr. Slate]

2 18s.

[jmkanek]

prolly what ill end up with if i cant get 4 15s in there, ne one else??

[jmkanek]

does anybody think its possible to fit 4 15s in an acura integra

[TurdFergueson2]

Which 15s? and how much space are you looking at?

[jmkanek]

audioque sdc2.5s, box will be around 18 cubes, walled off in the front and sealed along the sides on top of my car behind the b pillar, jus dunno if il have the room for subs and a big enough port on the face

[Mr. Slate]

Here a picture of my buddies Integra:

[528hz]

^^^^Is that space above the subs the port?

[jmkanek]

is at 15s man if so then theres no way ima get 4 back there, lol have to stick wit 4 12s or 2 18s

[ChedNompton]

I'm having a hell of a time fitting 4 15s in my Integra (SDC2.5). So far by walling i get around 200 sqin of port and 16.4 cubes, but its got a lot of weird angles. I've also done a "half wall" with subs up port up/back/forward. If I where you I'd go with the 2 18s for the lack of a headache. If your wanting to wall it, I'd go with the 4 12s as the dimensions seem to be better (to get above 32" width in my teg requires some stupid angles).

Good luck,
Larson

[mlstrass]

Took a LOT of work to fit 4 15's in my Altima, but it was worth it.

You need to rip everything out and start getting some measurements to see if you have enough baffle for the subs and port as that's the hardest part to make fit.

[jmkanek]

yea thas whats really getting me is the baffle, i know i can get enough airspace, but the daggon baffle on front is goin to be a pain, getting the subs and a big enough port to all fit, if i do wall it off im going from the rear floor boards to the headliner and sides, and sealing it off from the hatch. which its gonna take a long while for sure to get all the supplies and design, and equip together for this project, i was goin to go with 4 sdc 2.5s also in here, but a buddy of mine may sell me his 2 dd9518s, and if i can grab them from him for a good price then ill def go wit the 2 dd 18s

[jmkanek]

hey chednompton, where abouts are u locating ur subs and port in ya wall man, like where are you getting the room and everything best at of placement, any help is greatly appreciated

[ChedNompton]

hey chednompton, where abouts are u locating ur subs and port in ya wall man, like where are you getting the room and everything best at of placement, any help is greatly appreciated

Let me grab a picture real quick to show ya how my wall looks.

[mlstrass]

Did 2 DD 18's in a Caddy a few months back and it's a loud *** daily driver and wasn't hard to fit, but his car is much wider...