Closed Thread
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 17

Reload Thread: DD 1500 install (DD enthusiasts plz)

  1. #1
    Unfortunate's Avatar
    Unfortunate is offline Senior VIP Member



    Join Date
    Mar 2009
    Location
    Norcal, CA
    Posts
    244
    Post Thanks / Like
    Mentioned
    0 Post(s)

    DD 1500 install (DD enthusiasts plz)

    I'm going to be running (2) DD 1510's

    Just looking for something good on music with nice response and can handle the lows also for my DAILY driver.

    Notes:

    04 Accord Trunk install

    1500-1700w

    Leaning towards (2) 4" aeroports
    unless you can suggest a specific box design best for these

    subs back/port side or Subs back/port back

    what should i tune to?
    DD suggests 1.5 cubes so i'll probably just go with 3 cubes



    Any suggestions would be great......

    Thanks in advance.







  2. #2
    adas's Avatar
    adas is offline MurderMat adas is a Supporting Member of the forum!

    adas is a Supporting Vendor of the forum!

    Join Date
    Mar 2006
    Location
    SRQ-FL
    Posts
    1,681
    Post Thanks / Like
    Mentioned
    6 Post(s)

    Re: DD 1500 install (DD enthusiasts plz)

    mmm thatll be a great setup, either port/sub back or subs forward/ports to pass side in the back....2 4" aeros would be perfect

    tune to 38hz with the aeros




    Crescendo Audio The Logical Choice
    Murdermat.com More Mils for less Bills


    "Our freedom of speech includes volume"

  3. #3
    thevic24's Avatar
    thevic24 is offline my silence is deadly...



    Join Date
    Apr 2007
    Location
    right behind you
    Posts
    5,821
    Post Thanks / Like
    Images
    7
    Mentioned
    0 Post(s)

    Re: DD 1500 install (DD enthusiasts plz)

    Quote Originally Posted by adas View Post
    mmm thatll be a great setup, either port/sub back or subs forward/ports to pass side in the back....2 4" aeros would be perfect

    tune to 38hz with the aeros
    x2
    you should be very happy with that. build your box to about 2.7cuft and the 38hz tuning should be perfect.
    should put up some good #'s too, i have 1 1508 with 1k on it in an s-10 and i average low 139's sealed on the dash.



    Silently stalking you through glass....

  4. #4
    groundpound4200's Avatar
    groundpound4200 is offline Da fuq did I just read?



    Join Date
    Nov 2007
    Location
    Mankato, MN
    Age
    28
    Posts
    5,250
    Post Thanks / Like
    Mentioned
    4 Post(s)

    Re: DD 1500 install (DD enthusiasts plz)

    That should work out nicely.....



    2007 Honda Pilot 2008 Nissan Maxima
    2 RD D9s strapped @ 1 ohm Sundown SAZ-1500D V.3
    2 Sundown Nightshade V.2s 2 10" Atomic APX
    Sundown SAX-125.2 x 2 Sundown SAX-100.4
    Sundown NeoPro 6.5"s, JL ZR Tweets Sundown NeoPros

    RIP Taylor aka NewAgeKing, you are missed!

  5. #5
    bones22's Avatar
    bones22 is offline CarAudio.com Veteran



    Join Date
    Mar 2007
    Location
    in my house
    Posts
    8,193
    Post Thanks / Like
    Images
    5
    Mentioned
    0 Post(s)

    Re: DD 1500 install (DD enthusiasts plz)

    2.5 - 3 ft for the box
    tuning between 38-42hz




  6. #6
    Unfortunate's Avatar
    Unfortunate is offline Senior VIP Member

    Threadstarter


    Join Date
    Mar 2009
    Location
    Norcal, CA
    Posts
    244
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: DD 1500 install (DD enthusiasts plz)

    Quote Originally Posted by adas View Post
    mmm thatll be a great setup, either port/sub back or subs forward/ports to pass side in the back....2 4" aeros would be perfect

    tune to 38hz with the aeros
    Thanks, I hope it turns out nice.

    I really want to face them into the cabin but I have an odd shaped trunk not sure if it'll work.

    so, 3cubes @ 38hz w/ 2 4" aeros




  7. #7
    Unfortunate's Avatar
    Unfortunate is offline Senior VIP Member

    Threadstarter


    Join Date
    Mar 2009
    Location
    Norcal, CA
    Posts
    244
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: DD 1500 install (DD enthusiasts plz)

    Quote Originally Posted by thevic24 View Post
    x2
    you should be very happy with that. build your box to about 2.7cuft and the 38hz tuning should be perfect.
    should put up some good #'s too, i have 1 1508 with 1k on it in an s-10 and i average low 139's sealed on the dash.
    nice, not bad for 1 8"




  8. #8
    thevic24's Avatar
    thevic24 is offline my silence is deadly...



    Join Date
    Apr 2007
    Location
    right behind you
    Posts
    5,821
    Post Thanks / Like
    Images
    7
    Mentioned
    0 Post(s)

    Re: DD 1500 install (DD enthusiasts plz)

    Quote Originally Posted by Unfortunate View Post
    nice, not bad for 1 8"
    no, its not. that little basterd gets down. with the windows half way open i got a best 140.4 and could smell the coil a little.



    Silently stalking you through glass....

  9. #9
    Louisiana_CRX's Avatar
    Louisiana_CRX is offline dem shoes......



    Join Date
    Aug 2006
    Location
    Piney Hills of Louisiana
    Posts
    34,137
    Post Thanks / Like
    Images
    9
    Mentioned
    31 Post(s)

    Re: DD 1500 install (DD enthusiasts plz)

    I always used slot ports ....for the most part...I think measurements work different with aeros....but with slots and that much power .... I'd do 2.5 shared chamber plus port...40 sq inches of port opening....22" long....Port and subs rear firing...I have a 99 Accord sedan but I think my trunk is different than yours....

    on a 3 cu ft box plus port by my calculations would need 48 sq inches of port which is much closer to four 4" ports not two.....




    Current 2010 Louisiana USACi State Records :

    Trunk 0-1000.................. 151.3
    StreetBeat 2................... 145.6
    Stock 1801-up.................153.8
    SuperStock 1801-up..........154.2
    Top three in 11 out of 26 power classes and Louisiana USACi Points Leader at 465

  10. #10
    hazardous0388's Avatar
    hazardous0388 is offline CarAudio.com Veteran



    Join Date
    Sep 2006
    Location
    Springfield, MO
    Age
    26
    Posts
    4,741
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: DD 1500 install (DD enthusiasts plz)

    Quote Originally Posted by Louisiana_CRX View Post
    I always used slot ports ....for the most part...I think measurements work different with aeros....but with slots and that much power .... I'd do 2.5 shared chamber plus port...40 sq inches of port opening....22" long....Port and subs rear firing...I have a 99 Accord sedan but I think my trunk is different than yours....

    on a 3 cu ft box plus port by my calculations would need 48 sq inches of port which is much closer to four 4" ports not two.....
    do you mean 2.5 before sub displacements?



    refs: zeuslicious(Christian)x8---nomad40---shallowfu---adio---pioneerpimp---fiercetimbo17---hayden---BLD 25--flakko---R-sosa----denim---woc47----lilmaniac2(Chad Kevin motha ****in Hicks)----newtitan---IgnoreMe(George)---JBGabriel---BuddyChrist----KingRanch---assman---MitchZ---JoeSmith502---The Low x2---Fiery---dragnix---tapout -383---splguru---sq wat 4---PimpDaddyq---Mr_Imperial---AbsoluteAudio---KHARPS---Sotelomichael---dt053---cmobley---SomeDonnieDude---ax600---SQcrewcab--Zachfeen--Power-Fanatic07--t4r505--

    "You almost had me? You never had your subs. Ask any bass racer. Any true bass racer. Its not about how much a piece of equipment costs. Its how you install it."

  11. #11
    on1wheel01's Avatar
    on1wheel01 is offline Bang A Lang



    Join Date
    Aug 2008
    Location
    Mooresville nc
    Posts
    2,738
    Post Thanks / Like
    Mentioned
    1 Post(s)

    Re: DD 1500 install (DD enthusiasts plz)

    im currently building a 5 cubed box with 3 4" ports 12.5" long tuned at 36 for 1 9515. how long you gonna cut your ports?



    REFS
    bought from nismos14,lask48180,wu501,teamsolo,thegreatestpenn, 1phatclipse,lorilee8284,Louisiana_CRX,woofercooker ,97maxima,Bad4Health
    sold to sotogrip,bobby32,rgplayer,mxer657,deathpenalty18,C ahm Rohn
    traded with grimreper912003,5cr4ppy
    1999 Durango 2 Memphis Mojo 15's Audiopipe ap3k
    4 Date Safe 75 ah batts Alpine hu. Lots of wangin

  12. #12
    RipDaJacka's Avatar
    RipDaJacka is offline Banned



    Join Date
    Dec 2006
    Location
    D-Y Tennessee
    Posts
    3,383
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: DD 1500 install (DD enthusiasts plz)

    Quote Originally Posted by on1wheel01 View Post
    im currently building a 5 cubed box with 3 4" ports 12.5" long tuned at 36 for 1 9515. how long you gonna cut your ports?
    that will be sick.. pix?

    OP, i think 3cubes at 35-40hz would slam... I have never used areo ports, only slotted.. so i have no valuable pearls on that subject




  13. #13
    on1wheel01's Avatar
    on1wheel01 is offline Bang A Lang



    Join Date
    Aug 2008
    Location
    Mooresville nc
    Posts
    2,738
    Post Thanks / Like
    Mentioned
    1 Post(s)

    Re: DD 1500 install (DD enthusiasts plz)

    no pics yet i will be doing all my cuts tomorrow i just cut the 3 4.5" holes out and cut my pvc down tonight at work. do you know the cut out diameter for the 9515 mine is the d motor it won't be here until tue . and sorry to thread jack



    REFS
    bought from nismos14,lask48180,wu501,teamsolo,thegreatestpenn, 1phatclipse,lorilee8284,Louisiana_CRX,woofercooker ,97maxima,Bad4Health
    sold to sotogrip,bobby32,rgplayer,mxer657,deathpenalty18,C ahm Rohn
    traded with grimreper912003,5cr4ppy
    1999 Durango 2 Memphis Mojo 15's Audiopipe ap3k
    4 Date Safe 75 ah batts Alpine hu. Lots of wangin

  14. #14
    Unfortunate's Avatar
    Unfortunate is offline Senior VIP Member

    Threadstarter


    Join Date
    Mar 2009
    Location
    Norcal, CA
    Posts
    244
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: DD 1500 install (DD enthusiasts plz)

    Quote Originally Posted by Louisiana_CRX View Post
    I always used slot ports ....for the most part...I think measurements work different with aeros....but with slots and that much power .... I'd do 2.5 shared chamber plus port...40 sq inches of port opening....22" long....Port and subs rear firing...I have a 99 Accord sedan but I think my trunk is different than yours....

    on a 3 cu ft box plus port by my calculations would need 48 sq inches of port which is much closer to four 4" ports not two.....
    so you're saying I won't have enough port? and that 3 cubes would be external right with port and 2.5 for the chamber?

    Hmm..




  15. #15
    Unfortunate's Avatar
    Unfortunate is offline Senior VIP Member

    Threadstarter


    Join Date
    Mar 2009
    Location
    Norcal, CA
    Posts
    244
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: DD 1500 install (DD enthusiasts plz)

    Quote Originally Posted by on1wheel01 View Post
    im currently building a 5 cubed box with 3 4" ports 12.5" long tuned at 36 for 1 9515. how long you gonna cut your ports?
    38hz for my enclosure would be about 13-14" long i think?

    Quote Originally Posted by RipDaJacka View Post
    that will be sick.. pix?

    OP, i think 3cubes at 35-40hz would slam... I have never used areo ports, only slotted.. so i have no valuable pearls on that subject
    I'm starting to re-think the aeros. we'll thats if someone familiar can confirm that i'll need 4 instead of the two everyone else said would be fine.

    input anyone??




Closed Thread
Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts

1e2 Forum