I am going to use 6" flared aeros. the flares are the same diameter on each end. If I shave some off the diameter so I can pull them out when needed will it hurt me sound wise?
The reason I will be pulling them out is to tune higher to go to meca
CarAudio.com Elite
I am going to use 6" flared aeros. the flares are the same diameter on each end. If I shave some off the diameter so I can pull them out when needed will it hurt me sound wise?
The reason I will be pulling them out is to tune higher to go to meca
Sold To- Rumblebee2, headbussaboi, BallinByNature,fearof85,RetroAudioinc,schackel,Mak eshiftAudio
Bought From- Erthshker,mobeious
Traded With- Senco(Who Scammed Me)
http://www.caraudio.com/forum/showth...52#post5872052
Buddy Christ!
Just unscrew them, pull them as far outta the box as you can and then untape the connector rings and make the cuts/changes you need.
No need to trim one of the rings
THE WHOLE THING!!!
Well, you are supposed to just assemble them inside the box once the outside flare is mounted.
If you can't do that, then yes you can just cut off the flat part of the inside flare, it won't affect anything.
Team Kicker (R.I.P.)
Team Sundown
Team Maxxsonics
Team XS Power
Team DD
Team Audio Technix
Team B2 Audio
Team Mechman
2008 Bassrace 130-139.9 Regional and National Champion
2006, 2007, 2009, 2010 and 2012 MECA Champion (S1, SR1, DB1, S2, S3, S4)
One DD 9510 powered by two Sundown SAZ-2500's
Kicker KS tweeters, MB Quart 5.25's active on an MB Quart DSC480
Kicker wiring throughout.
CarAudio.com Elite
well see these don't have the screw option they are made to use pvc glue. I just need to be able to pull them out like once maybe twice a month for shows. I just wanted to make sure that shaving the back flare off would make port noise or anything like that
Sold To- Rumblebee2, headbussaboi, BallinByNature,fearof85,RetroAudioinc,schackel,Mak eshiftAudio
Bought From- Erthshker,mobeious
Traded With- Senco(Who Scammed Me)
http://www.caraudio.com/forum/showth...52#post5872052
Posting Permissions
 |
Bookmarks