Re: Box/Amp Rack Question
It probably won't produce the same sound. To take full advantage of a port facing you, you need to seal off any air behind it, other wise it will be pressurizing air behind the box, making it seem like it's not as loud. As for mounting the amps, the box is never a good idea, but some people get away with it by using a rubber foot mount to absorb some of the vibration. If you just slap the amp on the box, the vibrations may rattle off components on the amps board.
- 12'' Fi BL Fully Loaded - 2.2 cu. ft. box @ 35hz - 29 sq. in. of port - Stinger SPV 44 - Us Amps Merlin MD3D @ 2ohm - 5.25'' PG RSD Components - Big 3 in Hyperflex 1/0 - Pioneer DEH-3000IB - 140 sq. ft. of Stinger Roadkill Expert
Refs: Slam, Ridinhi, Blados, Pioneerpimp, Kowboy