Closed Thread
Results 1 to 3 of 3

Reload Thread: box help

  1. #1
    19992wdtaco's Avatar
    19992wdtaco is offline Member



    Join Date
    Jan 2009
    Location
    fresno, ca
    Posts
    71
    Post Thanks / Like
    Mentioned
    0 Post(s)

    box help

    I'm thinking about 2 8" Sundowns in a ported box for my reg cab tacoma.
    My outside dimensions would be:

    43" wide
    11.75" tall
    5" top depth
    7.5" bottom depth

    This comes to 1.27^3.

    After displacement of the subs and port is this large enough a box? How long of
    port to tune to 32hz? I'll be using 3" PVC.

    Thanks







  2. #2
    DonH's Avatar
    DonH is offline .....



    Join Date
    Jun 2008
    Location
    So Cal
    Posts
    5,982
    Post Thanks / Like
    Mentioned
    36 Post(s)

    Re: box help

    Quote Originally Posted by 19992wdtaco View Post
    I'm thinking about 2 8" Sundowns in a ported box for my reg cab tacoma.
    My outside dimensions would be:

    43" wide
    11.75" tall
    5" top depth
    7.5" bottom depth

    This comes to 1.27^3.

    After displacement of the subs and port is this large enough a box? How long of
    port to tune to 32hz? I'll be using 3" PVC.

    Thanks
    its actually 1.12ft^3 before displacement

    also to small to port. needs to be bigger




    Quote Originally Posted by chillin View Post
    How do you bridge a mono?
    Quote Originally Posted by snoopdan View Post
    throw it off one.
    feedback thread:
    http://www.caraudio.com/forums/buyer-seller-feedback/402726-d-man1s-official-feedback-thread-2.html

  3. #3
    19992wdtaco's Avatar
    19992wdtaco is offline Member

    Threadstarter


    Join Date
    Jan 2009
    Location
    fresno, ca
    Posts
    71
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: box help

    Oops, this was with 5/8" mdf. I can build it taller and use 3/4" if i need to.

    Looks like Sundown updated their site with the E8 since i was there last.

    It says .6cf @ 30hz tuning for ported. I listen to 80% metal should i tune it higher like
    36-40hz?




Closed Thread

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts
1e2 Forum