Does anyone know how to calculate box cu. ft. and the port cu.ft.?
Member
Does anyone know how to calculate box cu. ft. and the port cu.ft.?
can't use his mirrors
Length x Width x Height
Psych0tic Customs
Take the above and divide by (12 x12 x12) or 1728 to get cubic feet.Originally Posted by SubNit
Search.
References:
Ali1, michaellane, cadillac114, chasinSKURT, DaRevrin, rhuff80, sam yung, The215, tukn18s, Xenophontos
always low
Basic math? Like 5th grade?
Bought from: kmanian(x2), KyleBetchtold, Rio, 05_ZX636, SoCalNoob, dave_damage
Traded with: cj407, twistedchild420
Sold to: jadon087, dvldogyut, 95saturn, many box designs...
Click for High Output Enclosures Email (formerly Buck Box Designs)
I do sealed, ported, t-line (consistent width), 4th and 6th order bandpasses.
I answer any audio questions sent to my email for free.
Alpine - AT - ASE (local) - Batcap - DC - eD - Excessive Amperage - Powermaster - Rainbow
In Nashville? Me too! Pm me and come hangout!
Member
Sure, sounds easy enough, but check out the thread I have in this section about cu. ft.
There are actually two lengths of vent internal to the box.
My T1 12" woofer displacement is 0.08.
H-14" -1.5"
W-36" -1.5" - another 1.5 due to the two thicknesses of the vent
D-13.5" -1.5" -another 0.75 because the front alone is 1.5 plus the back is 0.75
Port
H-12"
W-2"
L-10.25"
IDK
Last edited by r.meeker; 02-02-2009 at 04:28 PM. Reason: added mor information to the thread
Posting Permissions
 |
Bookmarks