single 10" downfiring home audio aero size?
So, planning on tuning it around 30-32 hz, will be at 2.2 cubes before displacement, for a single 10, no more than 300 watts. Don't want to go lower, because I use it alot for music too.
Single 3" aero, single 4", or two 3"? It'll be downfiring. I'm planning on one 3" right now, will this be too little? Gonna be putting a lot of work into the box, don't want to fawk it up.
PAST: 1976 International Scout. JVC head unit, pioneer 6x9's, Focal 5.25 comps, and a Kicker S12L7 in 3.25 cubes at 37hz: Crunch PZI 1500.1 amp at 1 ohm. 1/0 throughout.
Replaced the factory 8 track and single 4x7 speaker behind the dash
PRESENT: 95 325TI. JVC HU, 5.25" PG RSD, Sony Xplod 604EQX 4ch built in EQ, 10" MB Quart Discus in custom molded 'glass enclosure
Refs: JLJunkieMX107/ HawaiianBassHed/ bk12321/NightDrifter05/Annao2485/nitro_freak1/tapout/juan_caliente/fasfocus00/TheFiverMan/Louisiana_CRX