Closed Thread
Results 1 to 5 of 5

Reload Thread: Need some advice on vented enclosure for Premier TS-W3001

  1. #1
    y22kc's Avatar
    y22kc is offline Junior Member



    Join Date
    Jan 2007
    Location
    Alexandria, LA
    Posts
    8
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Need some advice on vented enclosure for Premier TS-W3001

    Hello everyone, I have a Premier TS-W3001D2 sub I'm going to build a vented enclosure for. Using BassBox 6 Pro, I planned on building a 2.225 ft^3 box tuned to 33hz. I've got the flared port from partsexpress that is 4" in diameter. Bassbox says the port length should be 11.26 in. WinISD says 10.90 in, the calculator at caraudioforum.com says 11.02, and carstereo.com says 11.05. So what is the correct length? Also, the port came with instructions with a length formula and says the precision port should be 1" longer than Lv when assembled. So what do I go on?

    Also, if this box doesn't seem logical to you guys, maybe some suggestions? T/S parameters are:

    0.56 QTS
    0.58 Qes
    15.68 Qms
    32.1 Fs
    0.320 ft^3 VAS
    67.8 Sd sq inches
    24.83 BL (T.m measurement)
    0.48 Xmax inches

    Speaker holds 1000 watts RMS and is a dual 2ohm voice coil speaker. Appreciate any help!
    Last edited by y22kc; 11-06-2008 at 04:45 PM.







  2. #2
    Jeepjones85's Avatar
    Jeepjones85 is offline Gold Power



    Join Date
    Oct 2008
    Location
    South-East AR
    Posts
    928
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Need some advice on vented enclosure for Premier TS-W3001

    Man i dont know either I just ordered 4 of the 2ohm sub like urs and
    if you go by the manual it says To make a ported box you need like 1.6cubic ft max
    and the port should be round 3in ID x 2 1/2 and that dont sound right to me
    so I called pionner customer service and they assured me that the port dimensions were
    right ... So i dont know what you have in mind but you might want to down load the
    manual off of the web sight and see what you thank.




  3. #3
    y22kc's Avatar
    y22kc is offline Junior Member

    Threadstarter


    Join Date
    Jan 2007
    Location
    Alexandria, LA
    Posts
    8
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Need some advice on vented enclosure for Premier TS-W3001

    Yeah, it came with the manual, but that doesn't seem right to me. Most everyone else says the same, seems too small.




  4. #4
    y22kc's Avatar
    y22kc is offline Junior Member

    Threadstarter


    Join Date
    Jan 2007
    Location
    Alexandria, LA
    Posts
    8
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Need some advice on vented enclosure for Premier TS-W3001

    Just plugged in the numbers on bassbox6 pro, it says that it's tuned to 48hz, too high for what i'm looking for.




  5. #5
    Jeepjones85's Avatar
    Jeepjones85 is offline Gold Power



    Join Date
    Oct 2008
    Location
    South-East AR
    Posts
    928
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Need some advice on vented enclosure for Premier TS-W3001

    I do know. The way the sub is built has allot to do with it
    under the foam surround is another surround kinda like a air pocket, And from what
    the tech guy said from pioneer was that the extra surround made
    it where you didn't have to build the box as big or the ports
    If you look at like a church sound system the house speakers
    have the same round port on each side of the 12in or 15in subwoofer

    Whenever my subs come in im gona try to build it like the manual says
    I just got done ordering round ports off ebay They weren't that bad of a
    price. I thank I only payed 11.53$ for 4- 3in x 4in ports. Ill have to cut them down but
    thats ok. What ever you do dont order them from crutchfield they were gona be
    like 35$$ there for the same thing...




Closed Thread

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts
1e2 Forum