Are my #'s right for this ED10k x 2 box?

[Bobyota]

TD = 5"

BD = 7"

Height = 11.5"

Length = 46.5"

If my #'s are right, I get 1.17 ft^3 with 3/4" wood. I don't know what room the subs take up though

If they took up .17, then I'd be right at 1 ft^3 and ED recomends .5 ft^3 for each 10".

But, would each sub need it's own chamber (I mean seperate the box into 2 equal half's, one for each sub)?

[mgaidica]

yeh, ur nubmers are right.. with a sealed box .1 cu ft should matter all that much.. You CAN make seperate chambers.. although u dont have to.. it only prvents both from possibly blowing (one goes out, the other most likely wont).. personal preference..

[Bobyota]

Thanks man Will it make any sound diference with 2 seperate chambers? I basically want good sound from this system, and a lil spl too.

[mgaidica]

not really any sound difference if the seperator is put in the right place.. if its in the wrong place u might have problems..