Closed Thread
Results 1 to 9 of 9

Reload Thread: need a box designer that can do a slanted box with round ports

  1. #1
    fatboyracing's Avatar
    fatboyracing is offline CarAudio.com Veteran



    Join Date
    Sep 2007
    Location
    Evansville In
    Posts
    2,667
    Post Thanks / Like
    Mentioned
    0 Post(s)

    need a box designer that can do a slanted box with round ports

    Ok I am looking for someone how can do a design with an angle box with round ports if you can and are interested let me know.

    this is for the dd9512g that I sold to a buddy of mine and know we are going to build a box.

    it can be 34in wide and 12in tall the depth can vary but the 34x12 i would like to stay there



    refs.
    sold to raz0rxx ,hemi=22s (x3) , KCha,Americanstrat21, havieri23 (x2), Rudy',Mynameismcgyver,UNCchef ,jco1385,Linkz ,BushJ311,--Navi-- ,Korn4Life,DavaFlava,camaroaudio69,JLbumpin04gp,sv arasnj,TC2k15x2 ,18inchjeepin,boltpride,Sarthos, sonikaccord,pntbllwlly
    bought from profoundwill,Louisiana_CRX (x2),m3dia_lab,toddyosh ,duece212,speedfreak28,mendon99,Innovative:Cory (x alot),sundownz,fasfocus00,lyttleviet,RJesus ,m3dia_lab

    Traded with tribaljames,Louisiana_CRX




  2. #2
    PSturmer's Avatar
    PSturmer is offline CarAudio.com Elite



    Join Date
    Jun 2006
    Location
    Minnesota
    Posts
    1,948
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: need a box designer that can do a slanted box with round ports

    any box designer can do this



    4x 12" HDC3's
    1x Hifonics Maxximus (rated 10,000@1ohm)
    2x Powermaster D3100
    8x runs of 0 gauge
    1x stock alt

    155.2 dB legal (vehicle off and @50Hz) in a Ford exploder

  3. #3
    KHARPS's Avatar
    KHARPS is offline CarAudio.com Veteran



    Join Date
    Jul 2008
    Location
    IL
    Age
    27
    Posts
    3,332
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: need a box designer that can do a slanted box with round ports

    just mess around with this http://reaudio.com/speaker_box/LPort_Box_Calc.html
    It gives you a cut sheet and everything



    REFERENCES
    cam5860, Godsmack, dropkick13, ls2poweredgoat, bunkerking09, ProjectPechkin, GavinVoy, kmanian, magnum21, natetate, gqjeff, mustangowner, ssackett, hazardous0388, Rusty...WCA, ohsosmooth, grassroots, Leister, Scott S, Pyro_by_Nature, teamsolo, jblcamry, pickup1, got_focus?, fasfocus00, Zellner, Goindef154, Darknight, orangelss, Thorshammer1, BigSix

  4. #4
    Join Date
    Jul 2007
    Location
    Futurama
    Posts
    1,477
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: need a box designer that can do a slanted box with round ports

    go to bcae1.com then go to number 110 which is the box calc



    Quote Originally Posted by bunkerking09 View Post
    i have a little weiner

  5. #5
    9seconlives's Avatar
    9seconlives is offline Senior VIP Member



    Join Date
    Jun 2008
    Location
    Houston,TX
    Posts
    328
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: need a box designer that can do a slanted box with round ports

    Quote Originally Posted by fatboyracing View Post
    Ok I am looking for someone how can do a design with an angle box with round ports if you can and are interested let me know.

    this is for the dd9512g that I sold to a buddy of mine and know we are going to build a box.

    it can be 34in wide and 12in tall the depth can vary but the 34x12 i would like to stay there

    IF and ONLY IF all else fails...then check with this guy.......comes highly recommended by DD tech support.

    http://pwkdesigns.com/



    There is NEVER a stupid question but there ARE always dumb answers.........usually given by a matching individual.





    REFS:
    Traded W/- mrmakinmoves-

  6. #6
    fatboyracing's Avatar
    fatboyracing is offline CarAudio.com Veteran

    Threadstarter


    Join Date
    Sep 2007
    Location
    Evansville In
    Posts
    2,667
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: need a box designer that can do a slanted box with round ports

    I need round ports I just assume to pay someone to do it right



    refs.
    sold to raz0rxx ,hemi=22s (x3) , KCha,Americanstrat21, havieri23 (x2), Rudy',Mynameismcgyver,UNCchef ,jco1385,Linkz ,BushJ311,--Navi-- ,Korn4Life,DavaFlava,camaroaudio69,JLbumpin04gp,sv arasnj,TC2k15x2 ,18inchjeepin,boltpride,Sarthos, sonikaccord,pntbllwlly
    bought from profoundwill,Louisiana_CRX (x2),m3dia_lab,toddyosh ,duece212,speedfreak28,mendon99,Innovative:Cory (x alot),sundownz,fasfocus00,lyttleviet,RJesus ,m3dia_lab

    Traded with tribaljames,Louisiana_CRX

  7. #7
    schrummy's Avatar
    schrummy is offline CarAudio.com Elite



    Join Date
    Jun 2008
    Location
    Ames, Iowa
    Posts
    1,381
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: need a box designer that can do a slanted box with round ports

    i can do it for ya. what is the top and bottom max dims...



    Team TREO
    Team Midwest
    Team Gorilla
    USACI- trunk 0-1000 156.4 and climbing
    153 sealed on the dash
    yes its a trunk car and yes its only (2) 12s...

    refs=sold to......R/T Pimp, mustangowner, zyklonb, Miles0803
    Bought from…..2002XLT, R/T Pimp, 92c1v1c, Miles0803, camshoc, dbeez, goindef154

  8. #8
    schrummy's Avatar
    schrummy is offline CarAudio.com Elite



    Join Date
    Jun 2008
    Location
    Ames, Iowa
    Posts
    1,381
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: need a box designer that can do a slanted box with round ports

    also where would you like the port to exit the box... on the side on the face or where.



    Team TREO
    Team Midwest
    Team Gorilla
    USACI- trunk 0-1000 156.4 and climbing
    153 sealed on the dash
    yes its a trunk car and yes its only (2) 12s...

    refs=sold to......R/T Pimp, mustangowner, zyklonb, Miles0803
    Bought from…..2002XLT, R/T Pimp, 92c1v1c, Miles0803, camshoc, dbeez, goindef154

  9. #9
    schrummy's Avatar
    schrummy is offline CarAudio.com Elite



    Join Date
    Jun 2008
    Location
    Ames, Iowa
    Posts
    1,381
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: need a box designer that can do a slanted box with round ports

    srry for the triple post but....... how big of areo ports are you using. so i know how many to use...



    Team TREO
    Team Midwest
    Team Gorilla
    USACI- trunk 0-1000 156.4 and climbing
    153 sealed on the dash
    yes its a trunk car and yes its only (2) 12s...

    refs=sold to......R/T Pimp, mustangowner, zyklonb, Miles0803
    Bought from…..2002XLT, R/T Pimp, 92c1v1c, Miles0803, camshoc, dbeez, goindef154

Closed Thread

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts

1e2 Forum