Closed Thread
Results 1 to 4 of 4

Reload Thread: Box plans for 12" Fi BL (need box gurus approval)

  1. #1
    shellfish's Avatar
    shellfish is offline Senior VIP Member



    Join Date
    Mar 2008
    Location
    Concord. CA
    Posts
    288
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Box plans for 12" Fi BL (need box gurus approval)

    I'm bout to build my first box, here are the dems. for it.

    box w-31
    box h-15
    box d-16

    wood thinkness-.75

    port h-13.5
    port w-2.5

    port length 1-12.75
    port length 2-8


    box volume ~2.8

    tuned to ~32

    I've never designed a box and don't know if the port is fine like i designed it.
    If one of you box gurus could just look over it that'd be great thx.




    Did I ever tell you how much I love you?

    The boat times, and the day you pulled me up with your strong arms.

    I miss those days... just me and you, on the lake, drinkin' baileys from a shoe...

    Going to the parties where people wee on each other....

    Do you love me? Can you learn to love me?


    Bought: PsychoTheRapist
    Traded: adrian1185




  2. #2
    boomzilla's Avatar
    boomzilla is offline Got 'Roids?



    Join Date
    Mar 2008
    Location
    Florida
    Age
    24
    Posts
    1,262
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Box plans for 12" Fi BL (need box gurus approval)

    you can try re audio's box calculator to check it i think, i used it today and it seemed like it works perfectly. if thats what you did already then i think you should be fine...



    - 12'' Fi BL Fully Loaded - 2.2 cu. ft. box @ 35hz - 29 sq. in. of port - Stinger SPV 44 - Us Amps Merlin MD3D @ 2ohm - 5.25'' PG RSD Components - Big 3 in Hyperflex 1/0 - Pioneer DEH-3000IB - 140 sq. ft. of Stinger Roadkill Expert
    Refs: Slam, Ridinhi, Blados, Pioneerpimp, Kowboy

  3. #3
    schrummy's Avatar
    schrummy is offline CarAudio.com Elite



    Join Date
    Jun 2008
    Location
    Ames, Iowa
    Posts
    1,381
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Box plans for 12" Fi BL (need box gurus approval)

    you want it tuned that low. i thought that the bls would like a higher tuned box.... probably wroung though.
    any ways, box sounds right.



    Team TREO
    Team Midwest
    Team Gorilla
    USACI- trunk 0-1000 156.4 and climbing
    153 sealed on the dash
    yes its a trunk car and yes its only (2) 12s...

    refs=sold to......R/T Pimp, mustangowner, zyklonb, Miles0803
    Bought from…..2002XLT, R/T Pimp, 92c1v1c, Miles0803, camshoc, dbeez, goindef154

  4. #4
    boomzilla's Avatar
    boomzilla is offline Got 'Roids?



    Join Date
    Mar 2008
    Location
    Florida
    Age
    24
    Posts
    1,262
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Box plans for 12" Fi BL (need box gurus approval)

    fi recommends the bl's at a tuning of 32hz, so hes good there.
    just make sure theres enough port area and enough volume inside the box including sub and port displacement it will sound great



    - 12'' Fi BL Fully Loaded - 2.2 cu. ft. box @ 35hz - 29 sq. in. of port - Stinger SPV 44 - Us Amps Merlin MD3D @ 2ohm - 5.25'' PG RSD Components - Big 3 in Hyperflex 1/0 - Pioneer DEH-3000IB - 140 sq. ft. of Stinger Roadkill Expert
    Refs: Slam, Ridinhi, Blados, Pioneerpimp, Kowboy

Closed Thread

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts

1e2 Forum