internal box volume
2.314 cubic feet
this is including sub and bracing displacment, it is NOT including port displacment
I want to end up with 32 hertz
and I am going to probably need to run 2 ports because of the way the box is designed.
FI recommends 12-16 inches of vent per cubic foot of volume.
I was thinking 2 ports with 4.5 X 6.5 OD, how long would they each need to be to get to 32 hertz?
It is going to have to be fabricated in a square L7 style. I don't have a MDF wall to make a side from.
Thank you in advance for any help.