supports are coming loose

[MTs390]

I just had a box built buy CN sounds(chris norris' shop) and he put supports in it for my 2 MT's, but the supports are starting to come loose from the wood flexing. how can i prevent it from getting worse? someone told me i had to fiberglass the whole inside of the box but i wondered if that was necessary

[mazdakid]

what kind of supports? why not ask chris norris?

[MTs390]

they used pieces of 3/4"mdf board all the way along the inside but cut ports out for the air to flow through. there are two supposts all together, one on each side of the actual port. they liquid nailed and put brad nails in all the way along the supports also. he was the one that recommended fiberglassing the whole inside.

[bjfish11]

Thats why you dont use liquid nails....

[mlstrass]

x2

I'd reglue it with Elmers or TiteBond II...

[9seconlives]

Before you go re-doing it and/or fiberglassing the inside, wouldn't you wanna call or take it by CN Sounds to see if they'd take care of it for you?

[azbass]

sounds like a great box

[THUMPPER]

nothing holds MDF better than plain jane carpenters glue

[mrbomb]

pics?

[rain377]

i've been using liquid nail for years and am yet to have a problem with it. i know theres better out there but it's been working for me.

[mazdakid]

i've been using liquid nail for years and am yet to have a problem with it. i know theres better out there but it's been working for me.

you need to step up to something louder then.

[F3RR3T]

nothing holds MDF better than plain jane carpenters glue

quoted for truth

[MTs390]

i will post pics sometime this weekend of everything

[MTs390]

here ya go

[mlstrass]

pics of the supports that are coming loose are what's needed...