Pre fab boxes

[paul83085]

Hey guys, probably going to buy one since you really cant beat the price. And my question is that i just ordered to edk's 10's and im going to wire them in parallel and the box is split into chambers will the subs perform ok if i drill a hole or two inside the box so that i will be able to run the sub's at 2ohms????

[mgaidica]

just throw some liquid nails on each side, even with the hole it shouldnt mattr but u cant be to safe...

[slipknot87420]

since it's a 2 chamber box im sure it has 2 terminals why dont you just wire it parallel on the out side of the box using the terminals be lots easier but wont look as good because the wires going to 1 terminal to the next

[mgaidica]

Originally posted by slipknot87420
since it's a 2 chamber box im sure it has 2 terminals why dont you just wire it parallel on the out side of the box using the terminals be lots easier but wont look as good because the wires going to 1 terminal to the next

yeh, not looking good and using a lot of wire (depending on te box) Also, many prefabs are for SVC, so ude need to add another to each side.. unless u did internal/external wiring..