Best Glue For Wood

[MasterOfAllBass]

So whats the best glue for mdf wood for building a box? Need somthing good. I was thinking about gorilla glue.

[Fusion_FREAK]

Elmers wood glue, **** works pretty **** good. Use that plus MDF dust to fill in screw holes and splits too.

[fbi90909]

titebond 3
don't use gorilla glue. it expands when used

[Pickler]

I used titebond II on my box and it worked pretty well.

[MasterOfAllBass]

yea iv been also told elmers wood glue. Thanks

[ngsm13]

Titebond II nig.

nG

[mjf]

titebond 2/3

[Mr Cabinetry]

Elmers ProBond Woodworkers Glue

[elmersglue]

elmersglue wood glue

[lilmaniac2]

I tested the stength of some wood glues and the Loctite Wood Worx glue was the best, much stronger than the titebond II i used, although with both the wood broke before the joint so it doesnt really matter

the Wood Worx is a little thicker and easier to work with than the titebond stuff....

[ballstothewall]

Tightbond II.

[ballstothewall]

I tested the stength of some wood glues and the Loctite Wood Worx glue was the best, much stronger than the titebond II i used, although with both the wood broke before the joint so it doesnt really matter

the Wood Worx is a little thicker and easier to work with than the titebond stuff....

If the wood broke before the joint on both of them how can you say the glue is stronger? At this point you would be saying the wood on the Worx glue was stronger than the wood on the titebond test sample.

[lilmaniac2]

If the wood broke before the joint on both of them how can you say the glue is stronger? At this point you would be saying the wood on the Worx glue was stronger than the wood on the titebond test sample.

Because when i tested it, i used less and less glue until i was able to notice a difference in the two.

[hatemonger]

titebond 3
don't use gorilla glue. it expands when used

i use titebond as well, however, i have used gorilla glue in the past for boxes and the ***** is strong as hell. very ugly, but strong. works great if you're gluing 2 different materials together, such as plexi to wood or metal to wood.

[hatemonger]

Because when i tested it, i used less and less glue until i was able to notice a difference in the two.

i did the same by gluing 1x2's end to end. i pretty much got the same results from titebond 2, titebond 3, and elmers.