Closed Thread
Results 1 to 2 of 2

Reload Thread: starting a little 10" project....

  1. #1
    Join Date
    May 2008
    Location
    Hesperia, CA
    Posts
    118
    Post Thanks / Like
    Mentioned
    0 Post(s)

    starting a little 10" project....

    So its my first post on here but i've been checking out the site for a while i've just never registered. Anyways im going to build a box this weekend for a little peice of **** audiobahn 10 I have just for fun. I have no experience with ported boxes so I need some expert advice from you audioGods. haha..

    I have a couple designs so far but i'm not sure which one to do...
    1.35 ft>3 tuned to 34 w/ 18.75 sq in port area.
    OR
    2.37 ft>3 tuned to 34 w/ 27.75 sq in port area.

    id like it to at least turn out decent and be pretty clean on most rap songs as I need something to tide me over for a little while(system got stolen).

    oh and heres some specs on the sub:
    qts > .53
    qes > .57
    qms > 9.89
    vas > .78 ft>3
    xmax > 10mm
    ebp > 59
    and i'll be sending about 400rms to it

    I've been trying to research alot and im learning new stuff everyday but don't know **** about ported boxes. any recommendations? (besides the fact that audiobahn ***** haha) thanks alot....







  2. #2
    psych0ticnemes1's Avatar
    psych0ticnemes1 is online now Psych0tic Customs



    Join Date
    Apr 2005
    Location
    Behind You
    Posts
    5,752
    Post Thanks / Like
    Mentioned
    5 Post(s)

    Re: starting a little 10" project....

    The smaller box should be fine for a single 10". If you want a different design done for you let me know.



    References:

    Ali1, michaellane, cadillac114, chasinSKURT, DaRevrin, rhuff80, sam yung, The215, tukn18s, Xenophontos,nuboot,jfitz97,LuckyDerDer 2x

Closed Thread

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts

1e2 Forum