Closed Thread
Results 1 to 4 of 4

Reload Thread: Can someone check this for me?

  1. #1
    J216's Avatar
    J216 is offline Junior Member



    Join Date
    Apr 2008
    Location
    Ashtabula, Ohio
    Posts
    15
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Can someone check this for me?

    This is my first ported design.

    It should be 2.75 cu. ft. at 32 hz. If I did the math right. I used the sticky posted here and winisd to come up with the port length.

    The port is 2.5"x12.5"x27.25"

    The outside dimensions are 30"x14"x18.5"

    These are pretty much the max dimensions I have to work with.

    If someone would check my math and/or offer some constructive criticism, I'd really appreciate it.
    Attached Thumbnails Attached Thumbnails Can someone check this for me?-my-own-210-2d.jpg  







  2. #2
    psych0ticnemes1's Avatar
    psych0ticnemes1 is offline Psych0tic Customs



    Join Date
    Apr 2005
    Location
    Behind You
    Posts
    5,822
    Post Thanks / Like
    Mentioned
    5 Post(s)

    Re: Can someone check this for me?

    If driver displacement is .14 you are right on the money. Your port pieces should be 14.5" and 7.5" long, depend on how to screw them together. (Ex: They could also be 13.75" and 8.25")



    References:

    Ali1, michaellane, cadillac114, chasinSKURT, DaRevrin, rhuff80, sam yung, The215, tukn18s, Xenophontos,nuboot,jfitz97,LuckyDerDer 2x

  3. #3
    J216's Avatar
    J216 is offline Junior Member

    Threadstarter


    Join Date
    Apr 2008
    Location
    Ashtabula, Ohio
    Posts
    15
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Can someone check this for me?

    Not bad for a first try.

    I'm a little off on the net vol. according to the specs it's 0.10 for the pair. (JL 10w0)

    I must have rounded something wrong. But, 0.040 shouldn't make that big of a difference, Right?

    Thanks for the input.




  4. #4
    psych0ticnemes1's Avatar
    psych0ticnemes1 is offline Psych0tic Customs



    Join Date
    Apr 2005
    Location
    Behind You
    Posts
    5,822
    Post Thanks / Like
    Mentioned
    5 Post(s)

    Re: Can someone check this for me?

    Quote Originally Posted by J216 View Post
    Not bad for a first try.

    I'm a little off on the net vol. according to the specs it's 0.10 for the pair. (JL 10w0)

    I must have rounded something wrong. But, 0.040 shouldn't make that big of a difference, Right?

    Thanks for the input.
    Right, it won't make any difference whatsoever. Good luck!



    References:

    Ali1, michaellane, cadillac114, chasinSKURT, DaRevrin, rhuff80, sam yung, The215, tukn18s, Xenophontos,nuboot,jfitz97,LuckyDerDer 2x

Closed Thread

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts

1e2 Forum