Closed Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 15 of 36

Reload Thread: Design me a enclosure please

  1. #1
    lambo37's Avatar
    lambo37 is offline CarAudio.com Elite



    Join Date
    Apr 2008
    Location
    SD
    Posts
    710
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Design me a enclosure please

    So id like to go with one 18 in Fi BL, definately a ported box...

    Its going in a 1994 grand prix.

    Id like it tuned to 34hz...(is this a good hz?)
    I have lots of room when i take the backseat out.

    Heres the specs on the sub

    Fs: 33.1 Hz | 32.5 Hz
    Re: 0.75 Ohms/coil | 1.5 Ohms/coil
    Qms: 6.43 | 6.54
    Qes: .53 | .49
    Qts: .49 | .46
    Mms: 280g | 290g
    Cms: 0.13mm/N | 0.13mm/N
    Sd: 1210cm^2 | 1210cm^2
    Vas: 169.7 l | 169.7 l
    Spl: 92.5dB 1W/1m | 92.6dB 1W/1m
    Bl: 12.8 N/A | 19.0 N/A
    Xmax: 21mm
    Rms: 1000W *
    Sealed box: N/A cuft
    Ported box: 5-10 cuft @ 30-37Hz
    Sub OD: 18.500
    Cut ID: 16.750
    Mounting depth: 9.750
    Displacement: 0.23cuft


    THANKS, any more ?'s ask me.

    PS:this will be on or around 1500-1800 watts.







  2. #2
    blackbonnie's Avatar
    blackbonnie is offline The Revolution



    Join Date
    Jan 2007
    Location
    Grand Rapids, MI
    Posts
    10,146
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Design me a enclosure please

    so what size box do you want, and what are your max dimensions



    HU - Pioneer 800prs
    Mids - Peerless HDS nomex 6.5's
    Highs - Seas Prestige Alumi-domes
    Front Stage Amp - Sundown 100.4D
    Sub - SA-12
    Sub Amp - Saz-1000D
    Wire - Knukonceptz, Kicker Hyperflex

    Blackbonnie References/Feedback

  3. #3
    lambo37's Avatar
    lambo37 is offline CarAudio.com Elite

    Threadstarter


    Join Date
    Apr 2008
    Location
    SD
    Posts
    710
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Design me a enclosure please

    Quote Originally Posted by blackbonnie View Post
    so what size box do you want, and what are your max dimensions
    , um well IF AT ALL possible it would be cool if i could fit in the trunk, with sub up port back ro something.........but otherwise i have ALOT of room with the backseat out...so really whatever works for you. hah, although i dont have much depth, MAYBE 30in, basically whatever works for you. Remember though, i want a 18inch....thanks




  4. #4
    ssj2xxgotenxx's Avatar
    ssj2xxgotenxx is offline The Chan Man



    Join Date
    Nov 2003
    Location
    Bay Area
    Age
    27
    Posts
    2,616
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Design me a enclosure please

    Quote Originally Posted by lambo37 View Post
    , um well IF AT ALL possible it would be cool if i could fit in the trunk, with sub up port back ro something.........but otherwise i have ALOT of room with the backseat out...so really whatever works for you. hah, although i dont have much depth, MAYBE 30in, basically whatever works for you. Remember though, i want a 18inch....thanks
    NO, you need to be more specific! Don't be lazy, and get yourself a tape measure the dimensions of your car. There isn't any, "whatever works" in box building, it's a precise and methodical process that requires a ton of attention to detail. If you come into it with an attitude like that, your box is going to be a piece of ****.





    Loserpunk [Buyer]

    Kevokrook77 [Buyer] x2
    HCCAfan [Buyer]
    PRIVATEpastry [Seller]
    Trevor87 [Seller]
    Manosteel916 [Buyer]
    Vosschs [Buyer]
    jaberocs [Buyer]
    6spdcoupe [Buyer]
    Klepto [Seller]
    XxSuperAdamxX [Seller]
    kpozr2 [Buyer]


  5. #5
    lambo37's Avatar
    lambo37 is offline CarAudio.com Elite

    Threadstarter


    Join Date
    Apr 2008
    Location
    SD
    Posts
    710
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Design me a enclosure please

    Quote Originally Posted by ssj2xxgotenxx View Post
    NO, you need to be more specific! Don't be lazy, and get yourself a tape measure the dimensions of your car. There isn't any, "whatever works" in box building, it's a precise and methodical process that requires a ton of attention to detail. If you come into it with an attitude like that, your box is going to be a piece of ****.
    chil out guy, i thought it would be easier? Ill have to measure after school then..




  6. #6
    lambo37's Avatar
    lambo37 is offline CarAudio.com Elite

    Threadstarter


    Join Date
    Apr 2008
    Location
    SD
    Posts
    710
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Design me a enclosure please

    bump please?




  7. #7
    Screnzo's Avatar
    Screnzo is offline What happened in here?



    Join Date
    Nov 2006
    Location
    Crunktimes
    Posts
    4,288
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Design me a enclosure please

    Trunk measurements bro, get em. Most people can whip up a design for like 10-15 bucks if they have the measurements...



    "you have a face like a bulldog chewing a stinging nettle while taking a constipated dump in a heat wave"

  8. #8
    lambo37's Avatar
    lambo37 is offline CarAudio.com Elite

    Threadstarter


    Join Date
    Apr 2008
    Location
    SD
    Posts
    710
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Design me a enclosure please

    No one will do it for free? the measurements of the trunk are roughly 40w 40d, and 18h




  9. #9
    RAM_Designs's Avatar
    RAM_Designs is offline SketchUp Master



    Join Date
    Feb 2006
    Location
    Rockwall, TX
    Age
    28
    Posts
    21,044
    Post Thanks / Like
    Images
    1
    Mentioned
    97 Post(s)

    Re: Design me a enclosure please

    let me know when you get your dimensions...I'll design a good box for you.






    1,400+ designs since March 2011...
    I have my PM's turned off, please email at Ryan@RAM-Designs.com

  10. #10
    lambo37's Avatar
    lambo37 is offline CarAudio.com Elite

    Threadstarter


    Join Date
    Apr 2008
    Location
    SD
    Posts
    710
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Design me a enclosure please

    Uh i measured before i think their on roe ill go check........those look really good.

    edit: its 38 in width, 18 in in height, and 38 in in depth, thanks so much
    Double edit: will a sub up, port back/front sound good in a trunk with an 18??? Or should i just go 15?




  11. #11
    lambo37's Avatar
    lambo37 is offline CarAudio.com Elite

    Threadstarter


    Join Date
    Apr 2008
    Location
    SD
    Posts
    710
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Design me a enclosure please

    Bumptt




  12. #12
    lambo37's Avatar
    lambo37 is offline CarAudio.com Elite

    Threadstarter


    Join Date
    Apr 2008
    Location
    SD
    Posts
    710
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Design me a enclosure please

    bump to top, anyone?




  13. #13
    miker's Avatar
    miker is offline CarAudio.com Veteran



    Join Date
    Oct 2007
    Location
    Wayzata, MN
    Posts
    5,327
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Design me a enclosure please

    Alright.. Get down what sub you want, and I can do something quick..




  14. #14
    lambo37's Avatar
    lambo37 is offline CarAudio.com Elite

    Threadstarter


    Join Date
    Apr 2008
    Location
    SD
    Posts
    710
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Design me a enclosure please

    Quote Originally Posted by miker View Post
    Alright.. Get down what sub you want, and I can do something quick..

    Fi BL 18in, or else 15in, if you can make a good 15in ported box fit in the trunk.......id rather have 18 tho.




  15. #15
    iDesignBoxes's Avatar
    iDesignBoxes is offline This many.



    Join Date
    Mar 2008
    Location
    USA
    Posts
    453
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Design me a enclosure please

    Quote Originally Posted by RyanM923 View Post
    let me know when you get your dimensions...I'll design a good box for you.
    Solid designs. I thought we couldn't advertise in the signature?




    Shelby... I love you...!




    880PRS Seas Neo Alums Dayton RS-180 2x MAW-15 (SOON) eD Nine.5

    AIM: iDesignBoxes
    E-Mail: iDesignBoxes@gmail.com

Closed Thread
Page 1 of 3 1 2 3 LastLast

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts
1e2 Forum