Closed Thread
Results 1 to 7 of 7

Reload Thread: On this box plan what thickness MDF is it for?

  1. #1
    Bipolar's Avatar
    Bipolar is offline Certifiably Insane



    Join Date
    Oct 2006
    Location
    Washington Indiana 47501
    Age
    39
    Posts
    293
    Post Thanks / Like
    Mentioned
    0 Post(s)

    On this box plan what thickness MDF is it for?

    I'm building 2 different boxes for my RE SX 15" and I need to know what thickness MDF is this plan drawn to use? If im thinking right if you dont use the right thickness MDF for the plan then all the measurements will be off right??








  2. #2
    Reson8's Avatar
    Reson8 is offline What happened in here?



    Join Date
    Nov 2006
    Location
    Crunktimes
    Posts
    4,286
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: On this box plan what thickness MDF is it for?

    I would be surprised if it was for anything other than 3/4's. Almost all boxes are built with that thickness in mind except for either the extremely cheap or the extremely hardcore.



    "you have a face like a bulldog chewing a stinging nettle while taking a constipated dump in a heat wave"

  3. #3
    blackbonnie's Avatar
    blackbonnie is offline The Revolution



    Join Date
    Jan 2007
    Location
    Grand Rapids, MI
    Posts
    10,146
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: On this box plan what thickness MDF is it for?

    it is 3/4 mdf



    HU - Pioneer 800prs
    Mids - Peerless HDS nomex 6.5's
    Highs - Seas Prestige Alumi-domes
    Front Stage Amp - Sundown 100.4D
    Sub - SA-12
    Sub Amp - Saz-1000D
    Wire - Knukonceptz, Kicker Hyperflex

    Blackbonnie References/Feedback

  4. #4
    bumpin buick's Avatar
    bumpin buick is offline Science is everything



    Join Date
    Jul 2007
    Location
    Appleton, Wisconsin
    Posts
    11,023
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: On this box plan what thickness MDF is it for?

    I just went and bought MDF today, no one even touched the pallets of the 5/8 or 1/2 it looked like that stuff had been sitting and collecting dust for weeks. I think most any box plan is to 3/4



    http://www.caraudio.com/forums/buyer-seller-feedback/305521-official-bumpin-buick-feedback-thread.html

  5. #5
    Bipolar's Avatar
    Bipolar is offline Certifiably Insane

    Threadstarter


    Join Date
    Oct 2006
    Location
    Washington Indiana 47501
    Age
    39
    Posts
    293
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: On this box plan what thickness MDF is it for?

    Thats what I thought..thanks..BTW How much MDF do you think it would take to make this box?




  6. #6
    xtremebassjunky's Avatar
    xtremebassjunky is offline Is it ever loud enough?



    Join Date
    Apr 2006
    Location
    Charleston, SC, (Oklahoma)
    Posts
    3,858
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: On this box plan what thickness MDF is it for?

    i like 1"

    but that looks like 3/4"



    -Head Unit: Alpine-9886
    -Front Stage: 1 set of: DDA-W6.5's, DDA-W5.2's, and 3 sets of DD-T28's
    -Amps: 2x DDc4a's and 1x DD-C2b
    -Subs: 4x DD-3515E powered by 2x DD M4 -- giving me over 10kwrms... 154+ @ 24 Hz
    -Alternator: Stock 130a + 2 x 260a @ 15v Ohio Gen
    -Batteries: Batcap 3000 in front & 8400 + 4000 in back
    Refs: Alan Dante, Thilo Stompler, Nomad40, 2000LaDe, xplicitACTS, sundownz, djman37, Hoss, SPL140.2, bmxbikes, casper97ta, SkatinBassPLaya, Bibby, SeanDub, hazardous0388, Trunk_Monsta
    Team Outcast

  7. #7
    eric12421's Avatar
    eric12421 is offline Senior VIP Member



    Join Date
    Aug 2005
    Location
    RI
    Age
    26
    Posts
    242
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: On this box plan what thickness MDF is it for?

    It's 3/4 and I'd say if your building two boxes you'll probably need 2 4x8 sheets of 3/4 mdf, around here in ri each sheet is like 24.98 i believe at home depot



    1999 Ford Ranger 2.3l 5 speed Standard Cab
    Alpine CDA-9815
    Boston Pro 60's
    Ascendant Audio Arsenal 10"
    1.2 cubic feet @33 hertz

    Refs: dB Dom, mike11202, sundownz, jblayz1, Skip01, andreilopez, XaznKewLguyX, jfa1177, HawaiianBassHed, shiftmx6, j0ne, JiggaD369, criswrld

Closed Thread

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts

1e2 Forum