anyone have any ideas for a simple amp rack for 2 amps?
i have the memphis MCD1000 and MCD2004 fyi.
ive been searchin and trying my own ideas but nothing cool yet.
any help?
anyone have any ideas for a simple amp rack for 2 amps?
i have the memphis MCD1000 and MCD2004 fyi.
ive been searchin and trying my own ideas but nothing cool yet.
any help?
2000 BMW 528i
H.U.-JVC exad KD-AVX2
Components-Kenwood Excelon 5.25
Amps-Memphis mcd-1000, mcd 2004
Sub-DC sound Lab level 4 12"
Box-2 cf at 35 hz
Refs:Mobstar, roscod1
post up a pic of your trunk so we can see what you have to work with.
its empty now though
2000 BMW 528i
H.U.-JVC exad KD-AVX2
Components-Kenwood Excelon 5.25
Amps-Memphis mcd-1000, mcd 2004
Sub-DC sound Lab level 4 12"
Box-2 cf at 35 hz
Refs:Mobstar, roscod1
How big are the amps and what is hanging down under the rear deck?
stealth, or false floor flush mounted.
'01 5.9 Dakota R/T
HU: Pioneer Premier 680
Front Stage: highs: B&G neo8 planars
mid-bass: Hi-Vi Research 8" (x4)![]()
http://www.caraudio.com/forum/showthread.php?t=304095
Subs: MB Quart Rwe304(x2)
ported 4 cubes @ 30
Amps: MB Quart Reference 4x50
MB Quart Premium 1200.1D(1ohm)
REFS:
Sold to- Sky Deaner, Jeeper07, brazilianguy, bjl95mustang, Mr Wiggl3s, Ridinhi (x2), Pootie
Bought from- kurtdirt1, jmanpc, doingstuffwell
Traded with- DaGhost, Spooney
Looks like its the amps currently hung down from the rear deck.
I like the false floor idea, Or see what you can do up against the back wall in a flush mount sort of deal, one amp along the back wall and one on the floor. I doubt you got enough height to put both of them along the back wall but that would be pretty simple and clean looking.
Maybe go all out with what seems to be the most common approach. Take your current sub/box and put a beauty panel over it flushing it into the side. The panel will square off the entire right side of the truck and run all the way to the back wall. Then with a similar beauty panel mount the amps to the left side of the trunk and cover them with a beauty panel that will keep your full depth and the majority of the width in your truck usable.
2005 F350 crew cab diesel 4x4
-Work in Progress-
HU: Alpine 9887 linked to 10.4" TS TruckPC
Front Stage: Polk SR6500 Active
Front Amp: Sundown Sax100.4
Sub: Stereo Integrity Magnum V4 in the center console
Sub amp: Sundown Saz-1500D
Refs: low_end, Relax, SSon22s, Johnson, tyroneshoes, twisztdpunisher, flakko, djhn9, KINGDELL91, amoffitt, Justin89T, 01 S 10, Mazzasec
the rack that is visible in the picture isnt there anymore. i was think of doing a false floor but i would have to cut the floor carpet and im not sure if i want to to that.
2000 BMW 528i
H.U.-JVC exad KD-AVX2
Components-Kenwood Excelon 5.25
Amps-Memphis mcd-1000, mcd 2004
Sub-DC sound Lab level 4 12"
Box-2 cf at 35 hz
Refs:Mobstar, roscod1
definitely flush mounted with a false floor...best way to do it IMO.
2,500+ designs since March 2011
yeah i guess ill just have to cut the carpet.
2000 BMW 528i
H.U.-JVC exad KD-AVX2
Components-Kenwood Excelon 5.25
Amps-Memphis mcd-1000, mcd 2004
Sub-DC sound Lab level 4 12"
Box-2 cf at 35 hz
Refs:Mobstar, roscod1
Just remove the carpet and recover the trunk floor with new carpet, then when you change it again you have the factory carpet still intact.
(that's what I'm in the process of doing)
good idea
2000 BMW 528i
H.U.-JVC exad KD-AVX2
Components-Kenwood Excelon 5.25
Amps-Memphis mcd-1000, mcd 2004
Sub-DC sound Lab level 4 12"
Box-2 cf at 35 hz
Refs:Mobstar, roscod1
Bookmarks