Closed Thread
Results 1 to 2 of 2

Reload Thread: 2 Idq10 V.3

  1. #1
    aeon's Avatar
    aeon is offline Senior VIP Member



    Join Date
    Dec 2005
    Location
    CA
    Posts
    391
    Post Thanks / Like
    Mentioned
    0 Post(s)

    2 Idq10 V.3

    I'm planning on putting 2 IDQ10 V.3's in a ported box. This is going into an Acura Tsx. I went to subwoofertools.com and made a box and just wanted to know what you guys thought about it before I go ahead with the build.

    This is what I got

    Net Volume: 3.12 cubic feet
    Tuning Frequency: 27.5 Hz
    Port Width: 3 inches
    Port Area: 39 Square Inches
    Port Length: 39.25 inches

    External Dimensions: 30 wide x 14.5 tall x 21.75 deep.

    Board Dimensions and Quantity
    Color Count Width Height
    Top and Bottom 2 30 inches 21.75 inches
    Red 1 26.25 inches 13 inches
    Yellow 1 21 inches 13 inches
    Black 1 28.5 inches 13 inches
    Green 1 21.75 inches 13 inches
    Teal 1 17.25 inches 13 inches
    Violet 1 17.5 inches 13 inches

    Number of 49x97 Sheets of 3/4" MDF: 0.625

    The width and height I'm ok with, but the depth leaves me with not that much trunk space or room to get to my spare tire.

    Let me know what you guys think.

    Thanks







  2. #2
    aeon's Avatar
    aeon is offline Senior VIP Member

    Threadstarter


    Join Date
    Dec 2005
    Location
    CA
    Posts
    391
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: 2 Idq10 V.3

    ok, I plugged in some of this info on the RE calculator and I got some different numbers. My tuned freq is 25.9 and 3.04 ft3.




Closed Thread

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts
1e2 Forum