I'm about to make a 3 cubic feet sealed box. I need to know how much carpet do I need to carpet it. I was thinking i needed 2 yards but I'm not sure. Did I guess correctly?
Audiophile
I'm about to make a 3 cubic feet sealed box. I need to know how much carpet do I need to carpet it. I was thinking i needed 2 yards but I'm not sure. Did I guess correctly?
My Setup...
{Head Unit}
Eclipse 7200 MKII
{Sound Stage}
Seas Excel W18NX & Seas Prestige 27TBFC/G
10" IDMax
{Amplification}
US Amps Merlin I & 43
Still learning
depends on the dimensions of the enclosure , and the width of the carpet. I always buy a yard more than I need. Hell of a lot easier to cut extra off than to add extra on
5 % equipment
90 % install
5% beer
Low End Master
X2, you could allways use the extra elsewhere.Originally Posted by ramos
depends on the dimensions of the enclosure , and the width of the carpet. I always buy a yard more than I need. Hell of a lot easier to cut extra off than to add extra on
Car- Nissan Sentra Spec-V
HU- Kenwood Excelon XXV-01D
Front stage- Stock for now
Amps- Sundown Audio SAZ-1500D
Substage- Single 12" Sundown X12 Prototype
Box- 1.75ft^3 Sealed
"Watch the ***** flying twards you, i'm not kidding."
http://www.youtube.com/watch?v=OWm0C5zxVPw
nope, he wasn't kidding! lawl
Audiophile
i'm going to make it 9 x 9 x 9.
My Setup...
{Head Unit}
Eclipse 7200 MKII
{Sound Stage}
Seas Excel W18NX & Seas Prestige 27TBFC/G
10" IDMax
{Amplification}
US Amps Merlin I & 43
Audiophile
Carpet is 54" wide.
My Setup...
{Head Unit}
Eclipse 7200 MKII
{Sound Stage}
Seas Excel W18NX & Seas Prestige 27TBFC/G
10" IDMax
{Amplification}
US Amps Merlin I & 43
Resonating Reticular
Find the area of each face and add them together. Assuming it's a cube, 9x9 = 81 x 6 = 468" / 12 = 40.5' / 3 = 13.5 Yards Area.
You want carpet that'll cover 3 sides, so 9 x 3 = 9 yards wide by 12 yards long would be ideal. Get more, of course. I would get a 10-11 Y-wide by 13-14Y long. I'd rather have too much than too little.
P.S. I've always wanted a Suzuki Motorcycle. ;.;
Now designing / building boxes.
(Only building sealed and aero port boxes.)
PM me.
Feedback Thread
Refs: MSW Danny, atsaubrey (great seller), ampjunkielikeme, wgsj_fortvalley, tEh koRnDog, bad @SS chevy, Nismos14 (who is the man.)
Posting Permissions
 |
Bookmarks