Closed Thread
Results 1 to 6 of 6

Reload Thread: Need some help with a box here

  1. #1
    redrider13's Avatar
    redrider13 is offline is stealin yur deebeez



    Join Date
    Dec 2007
    Location
    VA
    Age
    24
    Posts
    440
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Need some help with a box here

    Well I'm going to build my first box and I'm desperately trying to not fudge it up. I've been on here an emailing back and forth with eclipse and I've gotten them to send me all the stuff I think I need, its just I dont speak subinese. I know what the tuning and port area is, I've got that figured out, I'm just unsure of how this all works together. This is for an SW7200 btw.

    Here's what they sent me:

    Thank you for contacting Eclipse;

    Here are the Parameters
    Fs= 28
    Qms=9.32
    Vas=2.17 (cft.)
    Cms=0.2
    Mms=167.2 (Grams)
    Rms=3.2
    X-Max one way 11.29(mm)
    Dia=216(mm)
    Sd=245(cm square root2)
    Qes=0.56
    Re=7.6 ohms
    BL=20.2 (Telsa Meter)
    Qts=0.52
    1 watt SPL=85.7(dB)


    and

    Thank you for contacting Eclipse;

    Will the box you will need a 2.0 cuft. one port 3"D x 6" L tunning freq. 34Hz




    I'm trying to use this site to help me build it:
    http://www.subwoofertools.com/forum/ported-box.asp

    The max dimensions I have to work with are 34" Length x 15" Height x and I want to keep the depth moderate so it won't be taking up half of my trunk.


    Thanks guys,
    Will







  2. #2
    BuckyBoy's Avatar
    BuckyBoy is offline Box Designer/Builder



    Join Date
    Oct 2007
    Location
    Northeast GA
    Age
    25
    Posts
    922
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: Need some help with a box here

    They call for a 3"D x 6"L aero port.
    You can get one from http://psp-inc.com/
    or www.partsexpress.com

    I don't think that is enough port area, but that's what they suggested to you.

    You could use these external dimensions...
    24Wx14Hx15D
    Should end up close to 2ft^3 net




    www.smith-customs.com
    Find Smith Customs on Facebook!

    References: Vexter 0944, Lingerfelt, riddla, Exploder 97, dillinja666, king ranch, chopsu3i, bonesninja, sxkicker89, djessenz, hl26, btdickey99, JLMaster, jbirrd15, bones22, belbo, 99grandprixGT, woody89, viebotls, garrettpf, SPL140.2, alex5857, Pickler, simpsonbuck, Rickikaye69, Bettr n' Revrse, swollen_cu


  3. #3
    redrider13's Avatar
    redrider13 is offline is stealin yur deebeez

    Threadstarter


    Join Date
    Dec 2007
    Location
    VA
    Age
    24
    Posts
    440
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: Need some help with a box here

    Is there anything wrong with a square port, I'd much rather just build a square port than have to order more stuff...




  4. #4
    BuckyBoy's Avatar
    BuckyBoy is offline Box Designer/Builder



    Join Date
    Oct 2007
    Location
    Northeast GA
    Age
    25
    Posts
    922
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: Need some help with a box here

    There isn't anything wrong with using a slot port. You can't use the dimensions I listed tho.
    Design a box that is 2ft^3 after sub and port displacement tuned around 32Hz.




    www.smith-customs.com
    Find Smith Customs on Facebook!

    References: Vexter 0944, Lingerfelt, riddla, Exploder 97, dillinja666, king ranch, chopsu3i, bonesninja, sxkicker89, djessenz, hl26, btdickey99, JLMaster, jbirrd15, bones22, belbo, 99grandprixGT, woody89, viebotls, garrettpf, SPL140.2, alex5857, Pickler, simpsonbuck, Rickikaye69, Bettr n' Revrse, swollen_cu


  5. #5
    redrider13's Avatar
    redrider13 is offline is stealin yur deebeez

    Threadstarter


    Join Date
    Dec 2007
    Location
    VA
    Age
    24
    Posts
    440
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: Need some help with a box here

    Which variable up there is the sub dispacement? and for the xmax I use the one way right? I read somewhere to double that for the xmax to use. These are the little questions I have that I'm just trying to make sure I do it right the first time.

    Edit: What do I use for sub displacement?
    Last edited by redrider13; 01-24-2008 at 09:33 PM.




  6. #6
    redrider13's Avatar
    redrider13 is offline is stealin yur deebeez

    Threadstarter


    Join Date
    Dec 2007
    Location
    VA
    Age
    24
    Posts
    440
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: Need some help with a box here

    It looks like any number between .08 an .1 cuft is what most people use for there sub displacement.


    EDIT: Here's the box I'm looking at now:

    http://www.subwoofertools.com/forum/...&Vas=&Fs=&CE=0

    2 ft^3 @ 32hz.




Closed Thread

User Tag List

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts
1e2 Forum